AOGInstant RFQ

Connector

Evaluation Kits Boards And Modules - Electrical & Electronic Connector Parts Sourcing

ASAP Components is a trusted distributor of high-quality Evaluation Kits Boards And Modules components, providing immediate inventory access for critical electronic and aerospace applications. Our expansive database indexes ready-to-ship Evaluation Kits Boards And Modules parts from top industry manufacturers such as Texas Instruments, including widely requested part numbers like a1101r04c. Every listing includes complete specifications and real-time availability to streamline procurement. Submit an online RFQ today for competitive pricing and dispatch options within 15 minutes.

Evaluation Kits Boards And Modules
Part No.ManufacturerDescriptionActions
a1101r04cTexas InstrumentsConnectorized CC1101 based, general purpose low power radio
a1101r08aTexas InstrumentsConnectorized CC1101 based, general purpose low power radio (EU)
a1101r08cTexas InstrumentsConnectorized CC1101 based, general purpose low power radio (EU)
a1101r09cTexas InstrumentsConnectorized CC1101 based, general purpose low power radio (USA/CA)
a2500r24cTexas InstrumentsConnectorized CC2500 based, general purpose low power radio
dc369-ltc1646-evaluation-kitItt CannonDemonstration Circuit DC369 demonstrates the LTC1646's ability to safely hot swap a CPCI bus requiring 5V and/or 3.3V supplies. The LTC1646 is able to power a wide range of capacitive loads in current limit and uses dual level circuit breakers to protect against over current and short-circuit fault conditions. In addition, the LTC1646 biases bus I/O connector pins to 1V, monitors the state of the 5VOUT and 3.3VOUT supply voltages with the HEALTHY# signal and combines PCI_RST# with HEALTHY# on-chip to generate the LOCAL_PCI_RST# signal.
dc429-lt4250-evaluation-kitItt CannonDemonstration circuit 429 is a Hot SwapÖ controller designed for dual û 48V battery feeds in telecom subsystems. This demo board is optimized for 2A maximum operating current, making it ideal for loads of 25W to 75W. The LT4250's circuit breaker is immune from transient currents arising from load dump, voltage spikes, and input steps. Provision is made for interfacing the LT4250's power good output either directly or via an opto isolator to a power converter, allowing for inclusion of a common mode filter block. The Connection Sense terminal helps eliminate uncontrolled arcing and associated damage to the backplane connector in real-world operating environments.
dc369-ltc1646-evaluation-kitItt CorporationDemonstration Circuit DC369 demonstrates the LTC1646's ability to safely hot swap a CPCI bus requiring 5V and/or 3.3V supplies. The LTC1646 is able to power a wide range of capacitive loads in current limit and uses dual level circuit breakers to protect against over current and short-circuit fault conditions. In addition, the LTC1646 biases bus I/O connector pins to 1V, monitors the state of the 5VOUT and 3.3VOUT supply voltages with the HEALTHY# signal and combines PCI_RST# with HEALTHY# on-chip to generate the LOCAL_PCI_RST# signal.
dc429-lt4250-evaluation-kitItt CorporationDemonstration circuit 429 is a Hot SwapÖ controller designed for dual û 48V battery feeds in telecom subsystems. This demo board is optimized for 2A maximum operating current, making it ideal for loads of 25W to 75W. The LT4250's circuit breaker is immune from transient currents arising from load dump, voltage spikes, and input steps. Provision is made for interfacing the LT4250's power good output either directly or via an opto isolator to a power converter, allowing for inclusion of a common mode filter block. The Connection Sense terminal helps eliminate uncontrolled arcing and associated damage to the backplane connector in real-world operating environments.
dim100con5pkTexas InstrumentsDIM100 Connector 5 PackDescription
steval-ifp019v1St Micro ElectronicsOther Development Tools VNI4140K-32 Solid State Relay Demo BRD
steval-pcc012v1St Micro ElectronicsBOARD DEM CONN GATEWAY STM32F107
stm3221g-evalSt Micro ElectronicsEvaluation Board For Inductor Motor Control Connector
Page 1 of 2‹ Prev12Next ›

What is Evaluation Kits Boards And Modules?

 Evaluation Kits Boards And Modules refers to a category of electrical and electronic connector components used to establish, maintain, or manage signal, power, or data pathways within a system. Selection typically depends on mechanical durability, contact reliability, and compatibility with industry standards. Engineers and procurement teams rely on Evaluation Kits Boards And Modules parts for consistent performance across demanding environments, from industrial equipment to aerospace and defense platforms making verified, traceable sourcing essential.

Key Features

  • Application-Specific Standards: Evaluation Kits Boards And Modules components meet the rigorous manufacturing standards of Texas Instruments for high-reliability use.

  • Verified MPN & Cross-Referencing: Direct catalog indexing of enables rapid cross-referencing and precise fitment.

  • Diverse Configurations: Multiple Evaluation Kits Boards And Modules specifications support exact form, fit, and function requirements.

Why Sourcing Teams Choose ASAP Components

  • Quality & Integrity: AS9120B and ISO 9001:2015 certified, with a No China Sourcing Pledge ensuring 100% authentic, traceable Evaluation Kits Boards And Modules parts with full C of C documentation.

  • Rapid AOG Turnaround: Custom Evaluation Kits Boards And Modules quotes delivered within 15 minutes via dedicated account managers and global distribution hubs.

  • Comprehensive Database: 5,100+ trusted manufacturers, with cross-referencing by NSN, NIIN, CAGE code, and MPN.

Certification & Membership

Built on Compliance & Trust

  • AS9120B / ISO 9001:2015
  • FAA AC 00-56B
  • ITAR Registered
  • NIST 800-171 Compliant
  • AS6081 Certified
  • D-U-N-S Registered
  • ESD Association ANSI/ESD-S20.20
  • ASA Member
  • NBAA Member
  • Inc. 500
  • CAGE Code 6RE77
  • Top Distributor 2018
  • Visual Compliance
  • Top Distributor 2020
  • Top Distributor 2025
  • Top Distributor 2026