AOGInstant RFQ

Drilling Machine Up · Submit a Quote

Quote for 00D676CLASS8 Federal Corporation Part with NSN 3413005405421

Part Number
00D676CLASS8
CAGE Code
81348
Part Type
Drilling Machine Up

Please fill out the form below for 00D676CLASS8

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

Part number 00D676CLASS8 (Drilling Machine Up) by Federal Corporation is available to quote — complete the RFQ form on this page and you will receive a response in 15 minutes or less.

Thank you for your interest in ASAP Components, an ASAP Semiconductor owned website with a large inventory of obsolete and hard-to-find military and civil aviation parts. Your request will be reviewed and quoted by one of our experienced sales representatives. You can also email your Bill of Materials (BOM) to sales@asap-components.com or call us toll-free at +1-714-705-4780. We are available 24/7, 365 days a year.

Certification & Membership

Built on Compliance & Trust

  • NBAA Member
  • Inc. 500
  • Top Distributor 2025
  • Top Distributor 2026
  • Top Distributor 2020
  • Top Distributor 2018
  • Visual Compliance
  • DUNS Registered

Characteristics Data of NSN 3413-00-540-5421, 3413005405421

MRCCriteriaCharacteristic
BTSZSPINDLE SPEED QUANTITY4
BTTBSPINDLE SPEED RANGE IN RPM2450.000 TO 6000.000
SR-1SPEC/STD CONTROLLING DATA
AJGDHEAD TYPEFIXED
BNQLMAIN DRIVE TYPEELECTRIC MOTOR
BNRLSPINDLE TRAVEL DISTANCE2.000 INCHES NOMINAL
BNRWBASE WORKING SURFACE LENGTHANY ACCEPTABLE
BNSDDISTANCE FROM SPINDLE CENTER TO COLUMN3.000 INCHES NOMINAL
BNSFBASE WORKING SURFACE TYPEPLAIN W/COOLANT TROUGH
FAAZPHASESINGLE
BNSLBASE WORKING SURFACE MOUNTING LOCATIONBASE
BNSMMAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE8.000 INCHES
BNSNUPPER WORKING SURFACE TYPEPLAIN
BNSPUPPER WORKING SURFACE SHAPERECTANGULAR
BNSQUPPER WORKING SURFACE AREAANY ACCEPTABLE
AKSQFUNGUS RESISTANT TREATMENTNOT INCLUDED
BNSTUPPER WORKING SURFACE WIDTH8.000 INCHES NOMINAL
BNSWUPPER WORKING SURFACE ADJUSTMENT FEATUREINCLUDED
BNSZTILT ADJUSTMENT DIRECTION AND ANGLE IN DEG90.0 LEFT 90.0 RIGHT
ACDCCURRENT TYPEAC
ZZZTNONDEFINITIVE SPEC/STD DATAB CLASS
ELECVOLTAGE IN VOLTS110.000
SR-1NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE00D676CLASS8
BWJNUPPER WORKING SURFACE MOUNTING LOCATIONOVER LOWER ROUND TABLE
BWJPMAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE7.500 INCHES
ALYEROTATION REVERSIBILITY FEATURENOT INCLUDED
AQDDFEED TYPEHAND
SR-1MANUFACTURERS CODE81348
BNRYDRILLING CAPABILITY1/4 IN MILD STEEL
BNRZCOLUMN TYPEROUND
BNSCDRILL CHUCK SIZE ACCOMMODATED1/4 IN. KEY
BNSGBASE WORKING SURFACE SHAPEROUND
BNSHBASE WORKING SURFACE AREAANY ACCEPTABLE
BNSJBASE WORKING SURFACE DIAMETER5.500 INCHES NOMINAL
BNSKBASE WORKING SURFACE VERTICAL ADJUSTMENT8.000 INCHES NOMINAL
BNSSUPPER WORKING SURFACE LENGTH6.000 INCHES NOMINAL
BNSXUPPER WORKING SURFACE VERTICAL ADJUSTMENT8.000 INCHES NOMINAL
BNSYSWIVEL ADJUSTMENT IN DEG90.000
AAXXMOUNTING TYPEBENCH
BQLRSPINDLE TYPESOLID MALE TAPERED FOR DRILL CHUCK
ALBHRADIO INTERFERENCE SHIELDINGNOT PROVIDED
BCRHSPINDLE QUANTITY1
FREQFREQUENCY IN HERTZ60.000

Are you looking quote for part 00D676CLASS8? The Federal Corporation-manufactured component (CAGE Code: 81348) is documented under NSN 3413005405421 as Drilling Machine Up. For the fastest quote, please complete our RFQ form with details about 00D676CLASS8. We guarantee a response within 15 minutes.

ASAP Components provides the verified 00D676CLASS8, classified under INC , FSG Drilling and Tapping Machines, FSC Drilling and Tapping Machines, NIIN 00-540-5421, and NCB USA (00). Submit your requirements today to receive immediate pricing and availability information.