Quote for VG02-01-01 Vitramon Inc Part with NSN 5930-00-124-0054

Part Number:  VG02-01-01
Alternate P/N:  VG020101
Manufacturer:  vitramon inc
NIIN:  1240054
Item Name :  switch sensitive
CAGE Code:  95275
FSC:  5930 Switches
INC Code:  00399
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  01-19-2026

Are you looking quote for part VG02-01-01? The Vitramon Inc-manufactured component (CAGE Code: 95275) is documented under NSN 5930-00-124-0054 as Switch Sensitive. For the fastest quote, please complete our RFQ form with details about VG02-01-01. We guarantee a response within 15 minutes.

ASAP Components provides the verified VG02-01-01, classified under INC 00399, FSG 59 Electrical and Electronic Equipment Components, FSC 5930 Switches, NIIN 00-124-0054, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for VG02-01-01

“*” Required Fields Are Compulsory

NSN Information for Part Number VG02-01-01 with NSN 5930-00-124-0054, 5930001240054

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-00-124-0054

Item PartTypeName:

SWITCH,SENSITIVE

59300012400540P
CIICHCCESDPMICCriticalityENAC
U G
Part NumberISCRNVCRNCCHCCMSDSSADC
312-334764-000225

Characteristics Data of NSN 5930-00-124-0054, 5930001240054

MRCCriteriaCharacteristic
AAQLBODY STYLEHOLE MOUNTED
ABFEHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONDUSTPROOF
ABHPOVERALL LENGTH0.766 INCHES NOMINAL
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH0.610 INCHES NOMINAL
ABKWOVERALL HEIGHT0.665 INCHES NOMINAL
ABMKOVERALL WIDTH0.137 INCHES NOMINAL
ADAQBODY LENGTH0.468 INCHES NOMINAL
ADATBODY WIDTH0.137 INCHES NOMINAL
ADAUBODY HEIGHT0.343 INCHES NOMINAL
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.040 INCHES NOMINAL
AFUQACTUATOR STYLEROUND
AFURACTUATOR DIAMETER0.062 INCHES NOMINAL
AFUSACTUATOR HEIGHT0.179 INCHES NOMINAL
AFXEMAXIMUM VOLTAGE RATING IN VOLTS50.0 DC
AKNAINCLOSURE TYPEFULLY INCLOSED
AXGYMOUNTING METHODTHREADED HOLE
CRLDNONPILE-UP CONTACT ARRANGEMENT1 POLE,SINGLE THROW,NORMALLY OPEN,MOMENTARY ACTION SINGLE SWITCH UNIT
CRRMSWITCH RELEASE FORCE4.0 INCH-OUNCES MINIMUM
CSJNSWITCH ACTUATING FORCE40.0 GRAMS MAXIMUM
CXQRCONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE150.000 MILLIAMPERES RESISTIVE DC
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT AND TERMINAL SURFACES GOLD
TTQYTERMINAL TYPE AND QUANTITY2 TAB,SOLDER LUG

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509050 (NAICS 335931) Switches, slide, for a voltage not exceeding 1, 000 v
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q22rfx-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top