Quote for CDM-10-006 Veeco Instruments Inc Part with NSN 5910-01-070-4818

Part Number:  CDM-10-006
Alternate P/N:  CDM10006
Manufacturer:  veeco instruments inc
NIIN:  10704818
Item Name :  capacitor fixed cer
CAGE Code:  80103
INC Code:  00007
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  01-18-2026

Are you looking quote for part CDM-10-006? The Veeco Instruments Inc-manufactured component (CAGE Code: 80103) is documented under NSN 5910-01-070-4818 as Capacitor Fixed Cer. For the fastest quote, please complete our RFQ form with details about CDM-10-006. We guarantee a response within 15 minutes.

ASAP Components provides the verified CDM-10-006, classified under INC 00007, FSG 59 Electrical and Electronic Equipment Components, FSC 5910 Capacitors, NIIN 01-070-4818, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for CDM-10-006

“*” Required Fields Are Compulsory

NSN Information for Part Number CDM-10-006 with NSN 5910-01-070-4818, 5910010704818

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-01-070-4818

Item PartTypeName:

CAPACITOR,FIXED,CERAMIC DIELECTR

59100107048180P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
07-10198-0A51CA

Characteristics Data of NSN 5910-01-070-4818, 5910010704818

MRCCriteriaCharacteristic
AAQLBODY STYLEW/O MTG FACILITIES,RADIAL TERMINALS
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH1.250 INCHES MINIMUM
ABPMBODY DIAMETER0.484 INCHES NOMINAL
ADAQBODY LENGTH0.156 INCHES NOMINAL
AEBTTERMINAL DIAMETER0.025 INCHES NOMINAL
AEBZSCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
CQBQCAPACITANCE VALUE PER SECTION0.100 MICROFARADS SINGLE SECTION
CQFBVOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE-33.0 TO 33.0 WITHOUT VOLTAGE APPLIED SINGLE SECTION
CQJJNONDERATED OPERATING TEMP-30.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION25.0 DC SINGLE SECTION
CRTPTOLERANCE RANGE PER SECTION-20.00 TO 50.00 PERCENT SINGLE SECTION
CWJKCASE MATERIALPLASTIC
CWPMDISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT10.0000
TTQYTERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532290040 (NAICS 334416) Fixed capacitors, nesoi
SITC : 77867 Fixed capacitors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top