Are you looking quote for part 23210? The Unison Industries Llc-manufactured component (CAGE Code: 83311) is documented under NSN 5975-01-170-4598 as Bend Electrical Con. For the fastest quote, please complete our RFQ form with details about 23210. We guarantee a response within 15 minutes.
ASAP Components provides the verified 23210, classified under INC 06998, FSG 59 Electrical and Electronic Equipment Components, FSC 5975 Electrical Hardware and Supplies, NIIN 01-170-4598, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5975-01-170-4598 Item PartTypeName: BEND,ELECTRICAL CONDUIT | 5975 | 011704598 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 23210 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | INSIDE DIAMETER | 0.492 INCHES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 0.562 INCHES NOMINAL |
| ACSX | OFFSET DISTANCE | 0.923 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |
| AGSJ | BEND RADIUS | 0.460 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| CSKG | BEND ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 405 NATIONAL SPEC 1ST MATERIAL RESPONSE OR AISI 430 NATIONAL SPEC 2ND MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | ANGULAR |
| End Use : 12110 | Iron and steel products, other |
|---|---|
| Schedule B : 7304390000 (NAICS 331110) | Other tubes, pipes and hollow profiles, seamless, circular cross-section, iron or nonalloy steel, not cold-drawn or cold-rolled |
| SITC : 67914 | Iron (except cast) and nonalloy steel seamless tubes, pipes and hollow profiles, n.E.S. Of circular cross-section |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | V |
|---|---|
| Classification Control | U |
| MGMT_CTL | ------- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | W - Rating variable |
| LTL: | W - Rating variable |
| NMFC: | 062010 - Fittings conduit noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
