Are you looking quote for part ANSI UL797? The Underwriters Laboratories Inc-manufactured component (CAGE Code: 81345) is documented under NSN 5975-01-083-3243 as Bend Electrical Con. For the fastest quote, please complete our RFQ form with details about ANSI UL797. We guarantee a response within 15 minutes.
ASAP Components provides the verified ANSI UL797, classified under INC 06998, FSG 59 Electrical and Electronic Equipment Components, FSC 5975 Electrical Hardware and Supplies, NIIN 01-083-3243, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5975-01-083-3243 Item PartTypeName: BEND,ELECTRICAL CONDUIT | 5975 | 010833243 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ANSI UL797 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | INSIDE DIAMETER | 0.824 INCHES NOMINAL |
| ABHK | TRADE SIZE | 0.750 |
| ABKV | OUTSIDE DIAMETER | 0.922 INCHES NOMINAL |
| ACSX | OFFSET DISTANCE | 7.000 INCHES MINIMUM AND 7.500 INCHES MAXIMUM |
| AGSJ | BEND RADIUS | 4.500 INCHES MINIMUM AND 4.750 INCHES MAXIMUM |
| ALXF | STRUCTURAL DESIGN | THINWALL |
| CRMM | TANGENT LENGTH | 2.550 INCHES NOMINAL |
| CSKG | BEND ANGLE | 88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | ZINC OVERALL |
| STYL | STYLE DESIGNATOR | ANGULAR |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 3 TYPE |
| End Use : 12110 | Iron and steel products, other |
|---|---|
| Schedule B : 7304390000 (NAICS 331110) | Other tubes, pipes and hollow profiles, seamless, circular cross-section, iron or nonalloy steel, not cold-drawn or cold-rolled |
| SITC : 67914 | Iron (except cast) and nonalloy steel seamless tubes, pipes and hollow profiles, n.E.S. Of circular cross-section |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | 17b2--- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | R - 65.0 |
| NMFC: | 051010 - Couplings conduit r pipe |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 658 - Electrical appliances, small |
