Quote for C375-2240G27 Transcon Technologies Inc Part with NSN 5950-00-070-1540

Part Number:  C375-2240G27
Alternate P/N:  C3752240G27
Manufacturer:  transcon technologies inc
NIIN:  701540
Item Name :  coil radio frequenc
CAGE Code:  00204
INC Code:  06338
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  01-14-2026

Are you looking quote for part C375-2240G27? The Transcon Technologies Inc-manufactured component (CAGE Code: 00204) is documented under NSN 5950-00-070-1540 as Coil Radio Frequenc. For the fastest quote, please complete our RFQ form with details about C375-2240G27. We guarantee a response within 15 minutes.

ASAP Components provides the verified C375-2240G27, classified under INC 06338, FSG 59 Electrical and Electronic Equipment Components, FSC 5950 Coils and Transformers, NIIN 00-070-1540, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for C375-2240G27

“*” Required Fields Are Compulsory

NSN Information for Part Number C375-2240G27 with NSN 5950-00-070-1540, 5950000701540

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5950-00-070-1540

Item PartTypeName:

COIL,RADIO FREQUENCY

59500007015400P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
2469401-2761CA

Characteristics Data of NSN 5950-00-070-1540, 5950000701540

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
ACYVINDUCTANCE RATING6.19 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING
ACZPCOIL FORM TYPESOLID SINGLE COMPONENT
ADAQBODY LENGTH0.312 INCHES MINIMUM AND 0.378 INCHES MAXIMUM
ADARBODY OUTSIDE DIAMETER0.140 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
AKNAINCLOSURE TYPEFULLY INCLOSED
AXGYMOUNTING METHODTERMINAL SINGLE GROUP
BKPLRATING METHODELECTRICAL SINGLE COMPONENT SINGLE WINDING
CRHJQUALITY FACTOR48 MINIMUM SINGLE COMPONENT SINGLE WINDING
TESTTEST DATA DOCUMENT10001-2469401-27 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D
TTQYTERMINAL TYPE AND QUANTITY2 WIRE LEAD

Schedule B & Trade

End Use : 20000 Generators, accessories
Schedule B : 8504500000 (NAICS 334416) Inductors, nesoi
SITC : 77125 Electrical inductors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063420 - Transformers, noi, or transformer par
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top