Are you looking quote for part 1-300-271-05? The Textron Lycoming Inc-manufactured component (CAGE Code: 80254) is documented under NSN 5340-00-844-9170 as Clamp Loop. For the fastest quote, please complete our RFQ form with details about 1-300-271-05. We guarantee a response within 15 minutes.
ASAP Components provides the verified 1-300-271-05, classified under INC 17532, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 00-844-9170, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-844-9170 Item PartTypeName: CLAMP,LOOP | 5340 | 008449170 | P | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1-300-271-05 | 1 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.375 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | OFFSET MOUNT |
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL,AROMATIC |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.032 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.592 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.780 INCHES NOMINAL |
| MATT | MATERIAL | PLASTIC CUSHION |
| MATT | MATERIAL | STEEL COMP 321 BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | PASSIVATE BAND |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| ESD | A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | S - 60.0 |
| LTL: | S - 60.0 |
| NMFC: | 061200 - Cable clamps/joints noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 658 - Electrical appliances, small |
