Are you looking quote for part 904-00294? The Taylor Dunn Corporation-manufactured component (CAGE Code: 10695) is documented under NSN 2520-01-036-7652 as Shaft Axle Automoti. For the fastest quote, please complete our RFQ form with details about 904-00294. We guarantee a response within 15 minutes
ASAP Components provides the verified 904-00294, classified under INC 10852, FSG 25 Vehicular Equipment Components, FSC 2520 Vehicle Power Transmission Components, NIIN 01-036-7652, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-01-036-7652 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 010367652 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 27355X | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABHP | OVERALL LENGTH | 26.000 INCHES NOMINAL |
| ABUJ | THREAD SIZE | 0.500-20 |
| AHTC | FLANGE OUTSIDE DIAMETER | 6.000 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF |
| AMEL | FIRST END BEARING SEAT DIAMETER | 2.875 INCHES NOMINAL |
| AMEP | FIRST END DISTANCE FROM BEARING SEAT TO END | 4.156 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 1.875 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.190 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.294 INCHES NOMINAL |
| AMPG | FIRST END LENGTH FROM STUD END TO FLANGE FACE | 1.750 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 5 STUD |
| BBCF | SECOND END SPLINE QUANTITY | 30 |
| BNTF | FIRST END BEARING SEAT | INCLUDED |
| BNTG | FIRST END BEARING SEAT WIDTH | 0.375 INCHES NOMINAL |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNYS | FLANGE OVERALL THICKNESS | 3.250 INCHES NOMINAL |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.344 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| End Use : 21180 | Industrial machines, other |
|---|---|
| Schedule B : 8483909500 (NAICS 333613) | Parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts |
| SITC : 74890 | Parts, n.E.S., for transmission shafts and cranks, bearing housings, gears, gearing, ball screws, gear boxes, flywheels and pulleys, clutches, etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9b----- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | M - 85.0 |
| NMFC: | 019940 - Auto transmissions r clutches |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 586 - Vehicle parts, other than automobile |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
