Are you looking quote for part 9M702-2B26? The Swan Industries Inc-manufactured component (CAGE Code: 54112) is documented under NSN 5340-01-501-4716 as Clamp Block Section. For the fastest quote, please complete our RFQ form with details about 9M702-2B26. We guarantee a response within 15 minutes
ASAP Components provides the verified 9M702-2B26, classified under INC 39404, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 01-501-4716, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-501-4716 Item PartTypeName: CLAMP,BLOCK,SECTION | 5340 | 015014716 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9M702-2B26 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 2.312 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.394 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.197 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 1.186 INCHES NOMINAL |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
| BYGG | BLOCK HEIGHT | 0.394 INCHES NOMINAL |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CWTD | CLAMPING HOLE QUANTITY | 4 |
| CWWM | CLAMPING HOLE DIAMETER | 0.266 INCHES NOMINAL FIRST HOLE |
| CWWM | CLAMPING HOLE DIAMETER | 0.266 INCHES NOMINAL FOURTH HOLE |
| CWWM | CLAMPING HOLE DIAMETER | 0.266 INCHES NOMINAL THIRD HOLE |
| CWWM | CLAMPING HOLE DIAMETER | 0.390 INCHES NOMINAL SECOND HOLE |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.562 INCHES NOMINAL |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.219 INCHES NOMINAL |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 0.749 INCHES NOMINAL |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 1.143 INCHES NOMINAL |
| CWYH | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES | 1.874 INCHES NOMINAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP, BLOCK - TUBE SUPPORT, PLASTIC |
| FEAT | SPECIAL FEATURES | NYLON, GLASS FILLED PER P.S. 14280, GRADE B, CLASS 2 |
| MATT | MATERIAL | PLASTIC |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
| SUPP | SUPPLEMENTARY FEATURES | A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM) |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature but does have other critical featur (s) such as tolerance, fit restrictions or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9bqe--9 |
| Quantity per pack | No qup |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | W - Rating variable |
| LTL: | W - Rating variable |
| NMFC: | 011790 - Aircraft parts noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 671 - Aircraft parts, to include test/tool sets and equipment (other than armament systems) |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
