Quote for 111P205J Sprague Electric Co Part with NSN 5910-00-723-4343

Part Number:  111P205J
Manufacturer:  sprague electric co
NIIN:  7234343
Item Name :  capacitor fixed pla
CAGE Code:  56289
INC Code:  00006
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  01-31-2026

Are you looking quote for part 111P205J? The Sprague Electric Co-manufactured component (CAGE Code: 56289) is documented under NSN 5910-00-723-4343 as Capacitor Fixed Pla. For the fastest quote, please complete our RFQ form with details about 111P205J. We guarantee a response within 15 minutes.

ASAP Components provides the verified 111P205J, classified under INC 00006, FSG 59 Electrical and Electronic Equipment Components, FSC 5910 Capacitors, NIIN 00-723-4343, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for 111P205J

“*” Required Fields Are Compulsory

NSN Information for Part Number 111P205J with NSN 5910-00-723-4343, 5910007234343

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-00-723-4343

Item PartTypeName:

CAPACITOR,FIXED,PLASTIC DIELECTR

59100072343430P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
0160-0221225

Characteristics Data of NSN 5910-00-723-4343, 5910007234343

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
ADAQBODY LENGTH2.062 INCHES MAXIMUM
ADATBODY WIDTH2.062 INCHES MAXIMUM
CQJJNONDERATED OPERATING TEMP-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
AAQLBODY STYLEW/MTG TABS/FLANGES,TERMINAL(S) ON ONE SURFACE
ABJTTERMINAL LENGTH0.750 INCHES MAXIMUM
ADAUBODY HEIGHT1.328 INCHES MAXIMUM
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.187 INCHES NOMINAL
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH2.375 INCHES NOMINAL
AEBZSCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
AXHRMOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED MOUNTING HOLES
CBBLFEATURES PROVIDEDHERMETICALLY SEALED CASE
CQBFINSULATION RESISTANCE AT MAXIMUM OPERATING TEMP100000.0 MEGOHMS
CQBQCAPACITANCE VALUE PER SECTION2.000 MICROFARADS SINGLE SECTION
CQLZTEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS-120.0 SINGLE SECTION
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION50.0 DC SINGLE SECTION
CRHDTOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
CRTPTOLERANCE RANGE PER SECTION-5.00 TO 5.00 PERCENT SINGLE SECTION
CWJKCASE MATERIALMETAL
CWPKINSULATION RESISTANCE AT REFERENCE TEMP250000.0 MEGOHMS
CWPMDISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT0.1000
CWSGTERMINAL SURFACE TREATMENTSOLDER
TTQYTERMINAL TYPE AND QUANTITY3 TAB,SOLDER LUG

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532250080 (NAICS 334416) Fixed capacitors, dielectric of paper or plastic, nesoi
SITC : 77866 Paper or plastics dielectric fixed capacitors

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top