Are you looking quote for part 100218R92? The Spalla Inc-manufactured component (CAGE Code: 22852) is documented under NSN 2520-00-740-9588 as Power Takeoff Trans. For the fastest quote, please complete our RFQ form with details about 100218R92. We guarantee a response within 15 minutes.
ASAP Components provides the verified 100218R92, classified under INC 18179, FSG 25 Vehicular Equipment Components, FSC 2520 Vehicle Power Transmission Components, NIIN 00-740-9588, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-740-9588 Item PartTypeName: POWER TAKEOFF,TRANSMISSION | 2520 | 007409588 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 002224-2 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMZ | DIAMETER | 1.248 INCHES MINIMUM AND 1.249 INCHES MAXIMUM |
| ABRR | KEYWAY WIDTH | 0.312 INCHES NOMINAL |
| ABRV | KEYWAY DEPTH | 0.500 INCHES NOMINAL |
| AFYS | KEYWAY LENGTH | 1.000 INCHES NOMINAL |
| AGLD | PERFORMANCE TYPE | MEDIUM DUTY |
| ATWQ | REVERSE SPEED QUANTITY | 1 |
| AXJH | FORWARD SPEED QUANTITY | 2 |
| BNXN | DRIVE GEAR TYPE | HELICAL |
| BNXY | DRIVE GEAR TEETH PRESSURE ANGLE IN DEG | 17.5 |
| BNXZ | DRIVE GEAR PITCH | 6 |
| BNYC | ACCESSORY DRIVE UNIT ACCOMMODATION | INCLUDED |
| BNYD | ACCESSORY DRIVE UNIT | NOT INCLUDED |
| BNYF | OUTPUT SHAFT DRIVE END QUANTITY | 1 |
| BNYH | OUTPUT SHAFT DRIVE END TYPE | PLAIN |
| BNYJ | DRIVE END SECURING METHOD | GROOVED |
| BNYK | DRIVE GEAR EXTENSION ADAPTER ASSEMBLY | INCLUDED |
| BNYM | SAE STANDARD MOUNTING PLATE ADAPTER | NOT INCLUDED |
| BNXX | DRIVE GEAR TEETH QUANTITY | 19 |
| BNYL | SAE STANDARD MOUNTING DESIGNATION | REGULAR OUTY TYPE |
| End Use : 21180 | Industrial machines, other |
|---|---|
| Schedule B : 8483909500 (NAICS 333613) | Parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts |
| SITC : 74890 | Parts, n.E.S., for transmission shafts and cranks, bearing housings, gears, gearing, ball screws, gear boxes, flywheels and pulleys, clutches, etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Y |
|---|---|
| Classification Control | U |
| MGMT_CTL | 1526--- |
| Quantity per pack | 1 |
| Repariability | If condemned or uneconomically repairable , then dispose at direct support (ds) level. |
| Shelf Life | N/A |
| SOS | Akz |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | W - Rating variable |
| LTL: | W - Rating variable |
| NMFC: | 126880 - Power trans shafting pulleys |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 885 - Vehicles, mhe, road construction, repair parts and components |
