Are you looking quote for part 7060P? The Siemens Water Technologies Corp-manufactured component (CAGE Code: 79172) is documented under NSN 6685-01-260-8121 as Indicator Pressure. For the fastest quote, please complete our RFQ form with details about 7060P. We guarantee a response within 15 minutes.
ASAP Components provides the verified 7060P, classified under INC 03378, FSG 66 Instruments and Laboratory Equipment, FSC 6685 Pressure Temperature And Humidity Measuring And Controlling Instruments, NIIN 01-260-8121, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | SPECIAL FEATURES | A PORTABLE CALIBRATION SYSTEM WITH A RANGE OF -100 TO 850 INCHES OF WATER AND -3.6 TO 30.6 PSI;ACCURACY OF .02 PERCENT;KNIFE EDGE POINTER MIRRORED POINTER FOR 2 REVOLUTIONS;2 REGULATED OUTPUTS;AIR SUPPLY IN;DIFFERENTIAL PSI INPUT AND STANDARD INPUT;SELECTOR VALVE FOR READINGS AND VENT;90 PSI OVERPRESSURE PROTECTION |
| ABGL | WIDTH | 12.000 INCHES NOMINAL |
| AMNL | PRESENTATION TYPE | DIAL |
| ABRY | LENGTH | 17.500 INCHES NOMINAL |
| HGTH | HEIGHT | 7.500 INCHES NOMINAL |
| CXQH | DIAL OUTSIDE DIAMETER | 8.500 INCHES NOMINAL |
| CWJK | CASE MATERIAL | ALUMINUM |
| End Use : 21160 | Measuring, testing, control instruments |
|---|---|
| Schedule B : 9026200000 (NAICS 334513) | Instruments and apparatus for measuring or checking pressure |
| SITC : 87435 | Instruments and apparatus for measuring or checking the pressure of liquids or gases, n.E.S. (not supply etc. Meters and regulating etc. Apparatus) |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| ESD | A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | L |
|---|---|
| Classification Control | U |
| MGMT_CTL | Lp*rk-n |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Fhz |
| Unit of Measure | Ea |
| ACC: | E - Engineer supplies, other than those listed under code b. |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | F - 150.0 |
| NMFC: | 058240 - Recording devices gauges/meters noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 652 - Instruments, scientific |
