Quote for D10-09-173 Sensor Systems Inc Part with NSN 5905-00-869-2008

Part Number:  D10-09-173
Alternate P/N:  D1009173
Manufacturer:  sensor systems inc
NIIN:  8692008
Item Name :  resistor variable w
CAGE Code:  04454
INC Code:  37408
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  05-24-2025

Are you looking quote for part D10-09-173? The Sensor Systems Inc-manufactured component (CAGE Code: 04454) is documented under NSN 5905-00-869-2008 as Resistor Variable W. For the fastest quote, please complete our RFQ form with details about D10-09-173. We guarantee a response within 15 minutes

ASAP Components provides the verified D10-09-173, classified under INC 37408, FSG 59 Electrical and Electronic Equipment Components, FSC 5905 Resistors, NIIN 00-869-2008, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for D10-09-173

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number D10-09-173 with NSN 5905-00-869-2008, 5905008692008

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-869-2008

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

5905008692008N
CIICHCCESDPMICCriticalityENAC
U
Part NumberISCRNVCRNCCHCCMSDSSADC
336859-3623

Characteristics Data of NSN 5905-00-869-2008, 5905008692008

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER0.7500 INCHES MAXIMUM
AAVMPILOT LENGTH0.0620 INCHES NOMINAL
ABPAUNDERCUT DIAMETER0.750 INCHES MAXIMUM
ABPCUNDERCUT WIDTH0.0620 INCHES NOMINAL
ABPMBODY DIAMETER0.891 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.125 INCHES MAXIMUM
ABXFSHAFT LENGTH0.500 INCHES NOMINAL
ADAQBODY LENGTH1.457 INCHES MAXIMUM
AECZMOUNTING LIP DIAMETER0.8750 INCHES NOMINAL
AEDAMOUNTING LIP DEPTH0.0620 INCHES NOMINAL
AEDXSHAFT STYLEROUND
AEDZSHAFT BEARING TYPEBALL
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE1.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE0.50 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE160.00 INCH-OUNCES
AEFYSHAFT END PLAY0.005 INCHES
AEFZSHAFT RUNOUT0.001 INCHES
AEGALATERAL RUNOUT0.002 INCHES
AEGBPILOT DIAMETER RUNOUT0.002 INCHES
AEGCSHAFT RADIAL PLAY0.001 INCHES
APXHTERMINAL LOCATIONLONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CQCCELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG3620.0 MAXIMUM
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.75 TO 0.75 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.18 FREE AIR SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION TERMINAL BASE LINEARITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
CSCYTEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
FEATSPECIAL FEATURESONE EXTERNAL 3.640 MEGOHMS FIXED RESISTOR LOCATED BETWEEN TERMINALS 1 AND 2
TTQYTERMINAL TYPE AND QUANTITY3 SOLDER STUD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications And Memberships



bottom to top