Quote for LD200B-101 Sensor Systems Inc Part with NSN 5905-00-764-7660

Part Number:  LD200B-101
Alternate P/N:  LD200B101
Manufacturer:  sensor systems inc
NIIN:  7647660
Item Name :  resistor variable w
CAGE Code:  04454
INC Code:  37408
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  05-26-2025

Are you looking quote for part LD200B-101? The Sensor Systems Inc-manufactured component (CAGE Code: 04454) is documented under NSN 5905-00-764-7660 as Resistor Variable W. For the fastest quote, please complete our RFQ form with details about LD200B-101. We guarantee a response within 15 minutes

ASAP Components provides the verified LD200B-101, classified under INC 37408, FSG 59 Electrical and Electronic Equipment Components, FSC 5905 Resistors, NIIN 00-764-7660, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for LD200B-101

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number LD200B-101 with NSN 5905-00-764-7660, 5905007647660

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-764-7660

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050076476600N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
737028-02223

Characteristics Data of NSN 5905-00-764-7660, 5905007647660

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
ABHPOVERALL LENGTH3.093 INCHES MINIMUM AND 3.157 INCHES MAXIMUM
ABPMBODY DIAMETER2.000 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.250 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
ADAQBODY LENGTH2.234 INCHES MINIMUM AND 2.266 INCHES MAXIMUM
ADAVOVERALL DIAMETER2.000 INCHES MAXIMUM
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE1.50 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE1.00 INCH-OUNCES
AEFPNONTURN DEVICE RADIUS0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONUPPER ADJACENT SIDE TWO ROWS
AXGYMOUNTING METHODSTANDARD BUSHING
AYQRCENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.875 INCHES NOMINAL
CBBLFEATURES PROVIDEDNONMETALLIC SHAFT
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG3600.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS5.0 FREE AIR SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY3 SOLDER STUD
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABXFSHAFT LENGTH0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM
AEDXSHAFT STYLEROUND
AEFDACTUATOR TYPESINGLE SHAFT
AEFNNONTURN DEVICE LOCATIONAT 6 OCLOCK
AJYNSCREW THREAD DIAMETER0.375 INCHES NOMINAL
CQCCELECTRICAL RESISTANCE PER SECTION100.000 OHMS SINGLE SECTION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Part LD200B-101 With Different Manufacturers

USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications And Memberships



bottom to top