Are you looking quote for part 3QRP28-073-163-C? The Qrp Inc-manufactured component (CAGE Code: 09094) is documented under NSN 5340-01-179-7360 as Latch Thumb. For the fastest quote, please complete our RFQ form with details about 3QRP28-073-163-C. We guarantee a response within 15 minutes.
ASAP Components provides the verified 3QRP28-073-163-C, classified under INC 06621, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 01-179-7360, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-179-7360 Item PartTypeName: LATCH,THUMB | 5340 | 011797360 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3QRP28-073-163-C | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 3.1444 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 1.190 INCHES NOMINAL |
| ABNM | THICKNESS | 1.990 INCHES NOMINAL OVERALL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | LATCH ASSEMBLY,SINGLE BUTTON |
| FEAT | SPECIAL FEATURES | MATERIAL: LINKAGE: CRES 302/304 PER MIL-S-5059,0.050 THICK,PUSHBUTTON: ALUMINUM 2024-T3 PER QQ-A-250/4,RIVETS ON LINKAGE: CRES,FOUR PLACES; ON PUSHBUTTON,ALUMINUM,TWO PLACES,SPRING: CRES 17-7PH PER AMS 5678,GASKET: CHLOROPRENE PER AM |
| MATT | MATERIAL | RUBBER CHLOROPRENE CLASS CR MEMBER |
| MATT | MATERIAL | STEEL CORROSION RESISTING SPRING |
| SFTT | SURFACE TREATMENT | ANODIZE MEMBER |
| SFTT | SURFACE TREATMENT | PASSIVATE BAR OVERALL |
| SPCL | SPECIAL TEST FEATURES | BUTTON OFFSET: 0.073 AND BOLT OFFSET: 0.163 |
| SUPP | SUPPLEMENTARY FEATURES | HEAT TREATMENT; SPRING ONLY,900 ( OR-10 DEGREES) FAHRENHEIT FOR 1 HOUR,AND AIR-COOL AT ROOM TEMPERATURE |
| End Use : 12300 | Finished metal shapes |
|---|---|
| Schedule B : 8301600000 (NAICS 332510) | Parts of locks, base metal |
| SITC : 69911 | Padlocks and locks (key, combination etc.), clasps and frames with clasps and locks, of base metal; keys for the foregoing articles, of base metal |
| ADPE | Represents items with no adp components |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | Q - 70.0 |
| LTL: | Q - 70.0 |
| NMFC: | 093880 - Catches/latches metal noi |
| SHC: | 5 - Low sensitivity, category iv, aa&e, unclassified |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
