Are you looking quote for part 1133030? The Pep West Inc-manufactured component (CAGE Code: 61081) is documented under NSN 5340-01-058-8827 as Clip Spring Tension. For the fastest quote, please complete our RFQ form with details about 1133030. We guarantee a response within 15 minutes
ASAP Components provides the verified 1133030, classified under INC 20815, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 01-058-8827, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-058-8827 Item PartTypeName: CLIP,SPRING TENSION | 5340 | 010588827 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1133030 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.064 INCHES MINIMUM AND 0.680 INCHES MAXIMUM |
| ABGL | WIDTH | 0.125 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 0.250 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM |
| ABRY | LENGTH | 0.195 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| AZWE | DISTANCE FROM LOOP CENTER TO END | 0.150 INCHES NOMINAL |
| CJYS | LOOP/HOLDING DIMENSION | 0.170 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| MATT | MATERIAL | COPPER ALLOY OVERALL |
| SFTT | SURFACE TREATMENT | TIN OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-T-10727,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| End Use : 12300 | Finished metal shapes |
|---|---|
| Schedule B : 7326908530 (NAICS 332999) | Hangers and similar supports for tubes and pipes, of iron or steel |
| SITC : 69969 | Articles of iron or steel, n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 095190 - Hardware, noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
