| MRC | Criteria | Characteristic |
|---|
| AAQL | III BODY STYLE | STRAIGHT SHAPE |
| ABHP | OVERALL LENGTH | 0.920 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 0.340 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.075 INCHES NOMINAL |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | 1 ROW OF CONTACTS NON-INSERTED BOARD SINGLE MATING END |
| AFQZ | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 3.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRN | POLARIZATION METHOD | GUIDE PIN/SOCKET |
| AFRV | CONNECTOR LOCKING METHOD | FRICTION |
| AWTN | III OPERATING TEMP RATING | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CBBL | FEATURES PROVIDED | PRE-TINNED TERMINAL |
| CQTM | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTZ | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH | CONTACT SURFACE TREATMENT | GOLD AND NICKEL AND SOLDER SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG | INSERT MATERIAL | PLASTIC POLYESTER OR PLASTIC POLYPHENYLENE SINGLE MATING END |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-M-45204, TYPE II, CLASS 1, GRADE C MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290 FED STD 2ND TREATMENT RESPONSE AND QQ-S-571 TYPE SN62 OR SN63 FED STD 3RD TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF | TERMINAL TYPE | TAB, SURFACE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B 194 ALLOY C17200, T-02 ASSN STD SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CTKL | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-24519 TYPE GPT-30F MIL SPEC 1ST MATERIAL RESPONSE OR MIL-M-24519 TYPE GST-40F MIL SPEC 2ND MATERIAL RESPONSE SINGLE MATING END |
| CXCG | INCLUDED CONTACT QUANTITY | 16 SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| FEAT | SPECIAL FEATURES | POSITION 2 IS FILLED ON THE SURFACE WITH EPOXY ON GUIDE POST HOLE AND POSITION 10 IS A CLEARANCE HOLE. |
| PMLC | III PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PMWT | III PRECIOUS MATERIAL AND WEIGHT | 0.016 GOLD GRAINS, TROY |
| PRMT | III PRECIOUS MATERIAL | GOLD |
