Are you looking quote for part 74E10N130? The Navy United States Department Of The-manufactured component (CAGE Code: 28687) is documented under NSN 5965-01-096-7825 as Handset. For the fastest quote, please complete our RFQ form with details about 74E10N130. We guarantee a response within 15 minutes.
ASAP Components provides the verified 74E10N130, classified under INC 00786, FSG 59 Electrical and Electronic Equipment Components, FSC 5965 Headset Handset Microphone and Speak, NIIN 01-096-7825, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5965-01-096-7825 Item PartTypeName: HANDSET | 5965 | 010967825 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1105576-1 | 5 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| ACBW | SHANK LENGTH | 2.062 INCHES |
| AFYV | DC RESISTANCE RATING IN OHMS | 45.0 MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | TA-840A/U |
| AGBG | CONNECTOR IDENTIFICATION | MS3106A-16S-1P |
| AHEQ | EARPHONE ELEMENT TYPE | DYNAMIC |
| AMQN | CONDUCTOR QUANTITY | 7 |
| AWZJ | POWER SOURCE | BATTERY |
| BKSQ | EARPHONE IMPEDANCE RATING | 15.0 OHMS NOMINAL |
| BKSW | MICROPHONE ELEMENT TYPE | DYNAMIC |
| BKTM | SHANK DIAMETER | 1.250 INCHES |
| BKTQ | INDIVIDUAL CONNECTOR TERMINATION TYPE | ANY ACCEPTABLE |
| End Use : 21400 | Telecommunications equipment |
|---|---|
| Schedule B : 8518903000 (NAICS 334310) | Microphone parts, loudspeaker parts, amplifier parts & headphone parts |
| SITC : 76492 | Parts of microphones, loudspeakers, headphones, earphones and combined microphone/speaker sets; audio-frequency electric amplifiers; etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | D |
|---|---|
| Classification Control | U |
| MGMT_CTL | 1-b2--- |
| Quantity per pack | No qup |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | M - 85.0 |
| NMFC: | 063300 - Telephone telephone part viz: sub 8 |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 723 - Radio parts and equipment, excluding tubes packed separately |
