Are you looking quote for part MS75022-37? The Military Standards Corp-manufactured component (CAGE Code: 96906) is documented under NSN 5975-00-152-1118 as Bend Electrical Con. For the fastest quote, please complete our RFQ form with details about MS75022-37. We guarantee a response within 15 minutes.
ASAP Components provides the verified MS75022-37, classified under INC 06998, FSG 59 Electrical and Electronic Equipment Components, FSC 5975 Electrical Hardware and Supplies, NIIN 00-152-1118, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5975-00-152-1118 Item PartTypeName: BEND,ELECTRICAL CONDUIT | 5975 | 001521118 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ANSI UL6 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASA | THREAD LENGTH | 1.730 INCHES MINIMUM 2ND END |
| AASA | THREAD LENGTH | 1.730 INCHES NOMINAL 1ST END |
| ABHK | TRADE SIZE | 4.000 |
| ACSX | OFFSET DISTANCE | 26.375 INCHES NOMINAL |
| AGSJ | BEND RADIUS | 23.000 INCHES NOMINAL |
| CQJX | NOMINAL THREAD SIZE | 4.000 INCHES BOTH ENDS |
| CRMM | TANGENT LENGTH | 3.375 INCHES NOMINAL |
| CSKG | BEND ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | ZINC OVERALL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 4 SIZE |
| End Use : 12110 | Iron and steel products, other |
|---|---|
| Schedule B : 7304390000 (NAICS 331110) | Other tubes, pipes and hollow profiles, seamless, circular cross-section, iron or nonalloy steel, not cold-drawn or cold-rolled |
| SITC : 67914 | Iron (except cast) and nonalloy steel seamless tubes, pipes and hollow profiles, n.E.S. Of circular cross-section |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | D |
|---|---|
| Classification Control | U |
| MGMT_CTL | Q2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 062010 - Fittings conduit noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 658 - Electrical appliances, small |
