Are you looking quote for part MS21105-15? The Military Standards Corp-manufactured component (CAGE Code: 96906) is documented under NSN 5340-01-012-1774 as Clamp Loop. For the fastest quote, please complete our RFQ form with details about MS21105-15. We guarantee a response within 15 minutes.
ASAP Components provides the verified MS21105-15, classified under INC 17532, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 01-012-1774, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-012-1774 Item PartTypeName: CLAMP,LOOP | 5340 | 010121774 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AS21919WCJ15 | 1 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL,AROMATIC AND FUEL RESISTANT AND OIL RESISTANT AND WEATHER RESISTANT |
| ABMK | OVERALL WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.032 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.905 INCHES MINIMUM AND 0.935 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.108 INCHES MINIMUM AND 1.168 INCHES MAXIMUM |
| BZTN | LOOP INSIDE DIAMETER | 0.923 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |
| MATT | MATERIAL | RUBBER CUSHION |
| MATT | MATERIAL | STEEL COMP 321 OR STEEL COMP 348 BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-25897 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-R-3065,GR RS515FF MIL SPEC SINGLE MATERIAL RESPONSE CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721 MIL SPEC ALL MATERIAL RESPONSES BAND |
| SFTT | SURFACE TREATMENT | PASSIVATE BAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND |
| STYL | STYLE DESIGNATOR | OFFSET MOUNT |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | Sf9sx-n |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | Q - 70.0 |
| NMFC: | 095190 - Hardware, noi sub 9 |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
