Quote for MIL-DTL-13735 Military Specifications Part with NSN 5930-00-296-6319

Part Number:  MIL-DTL-13735
Alternate P/N:  MILDTL13735
Manufacturer:  military specifications
NIIN:  2966319
Item Name :  switch toggle
CAGE Code:  81349
FSC:  5930 Switches
INC Code:  00184
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  01-15-2026

Are you looking quote for part MIL-DTL-13735? The Military Specifications-manufactured component (CAGE Code: 81349) is documented under NSN 5930-00-296-6319 as Switch Toggle. For the fastest quote, please complete our RFQ form with details about MIL-DTL-13735. We guarantee a response within 15 minutes.

ASAP Components provides the verified MIL-DTL-13735, classified under INC 00184, FSG 59 Electrical and Electronic Equipment Components, FSC 5930 Switches, NIIN 00-296-6319, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for MIL-DTL-13735

“*” Required Fields Are Compulsory

NSN Information for Part Number MIL-DTL-13735 with NSN 5930-00-296-6319, 5930002966319

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-00-296-6319

Item PartTypeName:

SWITCH,TOGGLE

59300029663190P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
384476-251295

Characteristics Data of NSN 5930-00-296-6319, 5930002966319

MRCCriteriaCharacteristic
AAQLBODY STYLEHOLE MOUNT
ABFEHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONWATERTIGHT
ABHPOVERALL LENGTH2.250 INCHES NOMINAL
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.812 INCHES NOMINAL
ABKWOVERALL HEIGHT2.563 INCHES NOMINAL
ABMKOVERALL WIDTH0.969 INCHES NOMINAL
ADAQBODY LENGTH2.250 INCHES NOMINAL
ADATBODY WIDTH0.969 INCHES NOMINAL
ADAUBODY HEIGHT1.625 INCHES NOMINAL
AFUQACTUATOR STYLEROUND
AFUSACTUATOR HEIGHT0.750 INCHES NOMINAL
AFUXACTUATOR POSITION-ACTION RELATIONSHIPUP POSITION MAINTAINED AND DOWN POSITION MOMENTARY
AFXEMAXIMUM VOLTAGE RATING IN VOLTS24.0 DC
AKNAINCLOSURE TYPEFULLY INCLOSED
AXGYMOUNTING METHODUNTHREADED HOLE
CMLPTHREAD QUANTITY PER INCH32
CQJXNOMINAL THREAD SIZE0.164 INCHES
CRLDNONPILE-UP CONTACT ARRANGEMENT1 POLE,SINGLE THROW,NORMALLY OPEN,MOMENTARY ACTION SINGLE SWITCH UNIT
CXQRCONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE25.000 AMPERES RESISTIVE DC AND 15.000 AMPERES INDUCTIVE DC AND 6.000 AMPERES LAMP DC
TESTTEST DATA DOCUMENT81349-MIL-S-13735 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
THSDTHREAD SERIES DESIGNATORUNC
TTQYTERMINAL TYPE AND QUANTITY2 CONNECTOR,RECEPTACLE
ZZZKSPECIFICATION/STANDARD DATA96906-MS39061 GOVERNMENT STANDARD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509065 (NAICS 335931) Switches, for a voltage not exceeding 1000 volts, nesoi
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top