| MRC | Criteria | Characteristic |
|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 1A 2ND END" |
| AAJD | THREAD CLASS | 2B 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.812 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES" |
| AHNC | CONNECTION STYLE | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL BOSS 2ND END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END" |
| CQBD | BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.875 INCHES 2ND END" |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 27.000 INCHES NOMINAL OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END" |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 1A 2ND END" |
| AAJD | THREAD CLASS | 2B 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.812 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES" |
| AHNC | CONNECTION STYLE | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL BOSS 2ND END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END" |
| CQBD | BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.875 INCHES 2ND END" |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 27.000 INCHES NOMINAL OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END" |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END" |
