Are you looking quote for part SS7000-10A? The Luftwaffeninstandhaltungsgruppe-manufactured component (CAGE Code: C2612) is documented under NSN 5340-00-847-9370 as Cover Access. For the fastest quote, please complete our RFQ form with details about SS7000-10A. We guarantee a response within 15 minutes.
ASAP Components provides the verified SS7000-10A, classified under INC 29785, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 00-847-9370, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-847-9370 Item PartTypeName: COVER,ACCESS | 5340 | 008479370 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SS700-10 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABGL | WIDTH | 5.730 INCHES MINIMUM AND 5.750 INCHES MAXIMUM |
| ABMW | PERIPHERAL SHAPE STYLE | RECTANGLE,FOUR HOLES |
| ABRY | LENGTH | 4.480 INCHES MINIMUM AND 4.500 INCHES MAXIMUM |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | 3.370 INCHES MINIMUM AND 3.380 INCHES MAXIMUM |
| ADNZ | DISTANCE BETWEEN HOLES ALONG WIDTH | 4.366 INCHES NOMINAL |
| ADPC | DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH | 0.547 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| ADPD | DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH | 0.192 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| ADQK | MOUNTING OPENING SHAPE STYLE | UNTHREADED HOLE |
| SFTT | SURFACE TREATMENT | ANODIZE |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | FLAT |
| AAUB | HOLE DIAMETER | 0.257 INCHES MINIMUM AND 0.259 INCHES MAXIMUM |
| ADPR | BODY THICKNESS | 0.064 INCHES NOMINAL |
| ADQB | SECURING DEVICE TYPE | TURNLOCK FASTENER |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| End Use : 12300 | Finished metal shapes |
|---|---|
| Schedule B : 7616995095 (NAICS 332999) | Articles of aluminum nesoi |
| SITC : 69979 | Articles of aluminum, n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | D |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | J - 100.0 |
| NMFC: | 013120 - Aluminum article noi sub 6 |
| SHC: | Z - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 576 - Metal and metal products, nos, (less than 35 feet) |
