Quote for 311032 Lucent Technologies Inc Part with NSN 5910-00-968-0742

Part Number:  311032
Manufacturer:  lucent technologies inc
NIIN:  9680742
Item Name :  capacitor fixed pap
CAGE Code:  06KW9
INC Code:  00003
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  01-19-2026

Are you looking quote for part 311032? The Lucent Technologies Inc-manufactured component (CAGE Code: 06KW9) is documented under NSN 5910-00-968-0742 as Capacitor Fixed Pap. For the fastest quote, please complete our RFQ form with details about 311032. We guarantee a response within 15 minutes.

ASAP Components provides the verified 311032, classified under INC 00003, FSG 59 Electrical and Electronic Equipment Components, FSC 5910 Capacitors, NIIN 00-968-0742, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for 311032

“*” Required Fields Are Compulsory

NSN Information for Part Number 311032 with NSN 5910-00-968-0742, 5910009680742

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-00-968-0742

Item PartTypeName:

CAPACITOR,FIXED,PAPER DIELECTRIC

59100096807420P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
26F6622C95

Characteristics Data of NSN 5910-00-968-0742, 5910009680742

MRCCriteriaCharacteristic
AAQLBODY STYLEW/O MTG FACILITIES,TERMINAL(S) ON ONE SURFACE
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH0.400 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
ADAQBODY LENGTH2.100 INCHES MINIMUM AND 2.220 INCHES MAXIMUM
ADATBODY WIDTH1.250 INCHES MINIMUM AND 1.370 INCHES MAXIMUM
ADAUBODY HEIGHT3.440 INCHES MINIMUM AND 3.560 INCHES MAXIMUM
AEBPCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH0.780 INCHES MINIMUM AND 0.840 INCHES MAXIMUM
AEBZSCHEMATIC DIAGRAM DESIGNATORELECTRODE(S) GROUNDED TO CASE,W/GND TERMINAL
AFHWINTERNAL ELECTRICAL CONNECTION TYPEINSERTED TAB
CQBQCAPACITANCE VALUE PER SECTION5.000 MICROFARADS SINGLE SECTION
CQJJNONDERATED OPERATING TEMP-55.0 DEG CELSIUS MINIMUM AND 70.0 DEG CELSIUS MAXIMUM
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION660.0 AC-RMS SINGLE SECTION
CRTPTOLERANCE RANGE PER SECTION-6.00 TO 6.00 PERCENT SINGLE SECTION
CWJKCASE MATERIALMETAL
CWPMDISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT0.300
TTQYTERMINAL TYPE AND QUANTITY2 QUICK DISCONNECT,MALE,DOUBLE BLADE

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532250080 (NAICS 334416) Fixed capacitors, dielectric of paper or plastic, nesoi
SITC : 77866 Paper or plastics dielectric fixed capacitors

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top