Quote for 0N401025-2 Joint Electronics Type Designation System Part with NSN 6625-01-268-8195

Part Number:  0N401025-2
Alternate P/N:  0N4010252
NIIN:  12688195
Item Name :  divider power radio
CAGE Code:  80058
INC Code:  60411
Country:  USA
NCB Code:  01
FSG:  66 Instruments and Laboratory Equipment
Last Updated:  08-25-2026

Are you looking quote for part 307101243? The Voith Turbo H L Hydraulic Gmbh And Co Kg-manufactured component (CAGE Code: 80058) is documented under NSN 3120015620781 as . For the fastest quote, please complete our RFQ form with details about 307101243. We guarantee a response within 15 minutes.

ASAP Components provides the verified 307101243, classified under INC 60411, FSG 66 Instruments and Laboratory Equipment, FSC 3120 Bearings Plain Unmounted, NIIN , and NCB 01. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for 0N401025-2

“*” Required Fields Are Compulsory

Characteristics Data of NSN 6625-01-268-8195, 6625012688195

MRCCriteriaCharacteristic
AHTWVOLTAGE STANDING WAVE RATIO2.50
AJDBPOWER RATING25.0 WATTS AVERAGE
FEATSPECIAL FEATURESRF POWER DIVIDER WITH FOUR INPUTS AND 59 OUTPUTS,THREE OF THE INPUTS ARE USED TO COVER THE FREQUENCY RANGE IN OCTAVE BANDS; OPERATING REQUIREMENT: 115 PORM 10 VRMS; 48.0 TO 62.0 HERTZ; SINGLE PHASE; RACK MOUNTED; 24.000 IN. DEEP; OUTPUT SIGNAL LEVEL:-15 TO 6 DBM; NOISE FIGURE; 12.0 DB MAXIMUM; GAIN: -6 DB MINIMUM
SR-5THE MANUFACTURERS DATA
ABKWOVERALL HEIGHT3.500 INCHES NOMINAL
ABMKOVERALL WIDTH19.000 INCHES NOMINAL
SR-5DESIGN CONTROL REFERENCE0N401025-2
SR-5MANUFACTURERS CODE98230

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

ASAP Semiconductor’s Certifications And Memberships



bottom to top