Are you looking quote for part TS971G? The Joint Electronics Type Designation System-manufactured component (CAGE Code: 80058) is documented under NSN 6625-00-539-8611 as Test Set Radio. For the fastest quote, please complete our RFQ form with details about TS971G. We guarantee a response within 15 minutes
ASAP Components provides the verified TS971G, classified under INC 03662, FSG 66 Instruments and Laboratory Equipment, FSC 6625 Electrical And Electronic Properties Measuring And Testing Instruments, NIIN 00-539-8611, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| MRC | Criteria | Characteristic |
|---|---|---|
| ACYN | AC VOLTAGE RATING | 117.0 VOLTS NOMINAL |
| ANPZ | INCLOSURE FEATURE | SINGLE ITEM W/HOUSING |
| ABGL | WIDTH | 13.500 INCHES NOMINAL |
| SR-5 | MANUFACTURERS CODE | 80058 |
| AQXZ | OPERATING TEST CAPABILITY | CONTROL RECEIVER,RANGE 150 TO 160MC;WWV RECEIVER,RANGE 152 TO 174 MC |
| SURF | SURFACE TREATMENT | ENAMEL |
| SR-5 | DESIGN CONTROL REFERENCE | TS971G |
| ANNQ | MATERIAL AND LOCATION | STEEL HOUSING |
| AQXY | TEST TYPE FOR WHICH DESIGNED | MEASUREMENT OF CARRIER FREQUENCY DEVIATION;MEASUREMENT OF FREQUENCY MODULATION OF CARRIER SIGNAL;MEASUREMENT OF TRANSMITTER RELATIVE FIELD STRENGTH |
| SR-5 | THE MANUFACTURERS DATA | |
| HGTH | HEIGHT | 10.500 INCHES NOMINAL |
| ABRY | LENGTH | 21.000 INCHES NOMINAL |
| End Use : 21160 | Measuring, testing, control instruments |
|---|---|
| Schedule B : 9030908030 (NAICS 334515) | Parts and accessories of articles of schedule b subheading 9030.39 |
| SITC : 87479 | Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | V |
|---|---|
| Classification Control | U |
| MGMT_CTL | Lp1ten- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | B64 |
| Unit of Measure | Ea |
| ACC: | A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | P - 77.5 |
| LTL: | W - Rating variable |
| NMFC: | 061700 - Elec appliances/instruments noi |
| SHC: | Q - High sensitivity, category ii, aa&e, classified confidential |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 653 - Musical instruments |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
