Are you looking quote for part SCDL289508? The Joint Electronics Type Designation System-manufactured component (CAGE Code: 80058) is documented under NSN 6625-00-519-2629 as Test Set Audio. For the fastest quote, please complete our RFQ form with details about SCDL289508. We guarantee a response within 15 minutes
ASAP Components provides the verified SCDL289508, classified under INC 03617, FSG 66 Instruments and Laboratory Equipment, FSC 6625 Electrical And Electronic Properties Measuring And Testing Instruments, NIIN 00-519-2629, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| MRC | Criteria | Characteristic |
|---|---|---|
| AQXZ | OPERATING TEST CAPABILITY | SIGNAL GENERATOR;INPUT P10 TO M60 DBM CALIBRATED FOR 600 IMPEDANCE 10 DB STEPS AVAILABLE ON STEP ATTENUATOR,VOLTMETER;OUTPUT 1000 CYCLE TONE,M35 TO P10 DBM IN ONE DB STEPS INTO 600 OHMS,TOTAL HARMONIC DISTORTION READS FROM P3 TO M20 DBM WEIGHED NOISE READING |
| SURF | SURFACE TREATMENT | ENAMEL |
| ANPZ | INCLOSURE FEATURE | SINGLE ITEM W/HOUSING |
| AQXY | TEST TYPE FOR WHICH DESIGNED | TRANSMISSION MEASURING SET FOR ALIGNMENT OF TELEPHONE CIRCUITS |
| FAAZ | PHASE | SINGLE |
| ACZB | FREQUENCY RATING | 47.5 HERTZ MINIMUM 1ST ALTERNATE OPERATING POWER RQMT 63.0 HERTZ MAXIMUM 2ND ALTERNATE OPERATING POWER RQMT |
| HGTH | HEIGHT | 7.000 INCHES NOMINAL |
| ABRY | LENGTH | 17.625 INCHES NOMINAL |
| ACYN | AC VOLTAGE RATING | 115.0 VOLTS NOMINAL |
| ANNQ | MATERIAL AND LOCATION | ALUMINUM HOUSING |
| ABGL | WIDTH | 19.000 INCHES NOMINAL |
| ALSF | INTERNAL BATTERY ACCOMMODATION | NOT INCLUDED |
| AGAV | III END ITEM IDENTIFICATION | TYPE NO. AN/ICC-13 |
| End Use : 21160 | Measuring, testing, control instruments |
|---|---|
| Schedule B : 9030908030 (NAICS 334515) | Parts and accessories of articles of schedule b subheading 9030.39 |
| SITC : 87479 | Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations |
| CRITL | The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input). |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | Y |
|---|---|
| Classification Control | U |
| MGMT_CTL | Gp15zn- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | B16 |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | M - 85.0 |
| LTL: | W - Rating variable |
| NMFC: | 061700 - Elec appliances/instruments noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 658 - Electrical appliances, small |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
