Are you looking quote for part MX-175-U? The Joint Electronics Type Designation System-manufactured component (CAGE Code: 80058) is documented under NSN 5965-00-642-8611 as Headband Headset. For the fastest quote, please complete our RFQ form with details about MX-175-U. We guarantee a response within 15 minutes.
ASAP Components provides the verified MX-175-U, classified under INC 08090, FSG 59 Electrical and Electronic Equipment Components, FSC 5965 Headset Handset Microphone and Speak, NIIN 00-642-8611, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5965-00-642-8611 Item PartTypeName: HEADBAND,HEADSET | 5965 | 006428611 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 133B1076A | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABFF | FURNISHED ITEMS | NONE |
| AEEE | CONNECTOR MANUFACTURER CODE | 80063 |
| AEEF | CONNECTOR MANUFACTURER PART NUMBER | PJ-054B |
| AFAH | HEADBAND MATERIAL | STEEL |
| AHEJ | HEADBAND TYPE | ADJUSTABLE SINGLE BAND |
| AHEK | HEADBAND COVERING MATERIAL | RUBBER FOAM,SYNTHETIC |
| AHEM | HEADSET CORD LENGTH | 12.5 INCHES NOMINAL |
| AHET | EARPHONE ACCOMMODATION QUANTITY | 2 |
| AHFZ | SIGNAL INPUT TERMINAL TYPE | PLUG |
| FEAT | SPECIAL FEATURES | MARKED MK-175/U |
| End Use : 21400 | Telecommunications equipment |
|---|---|
| Schedule B : 8518903000 (NAICS 334310) | Microphone parts, loudspeaker parts, amplifier parts & headphone parts |
| SITC : 76492 | Parts of microphones, loudspeakers, headphones, earphones and combined microphone/speaker sets; audio-frequency electric amplifiers; etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | V |
|---|---|
| Classification Control | U |
| MGMT_CTL | 17b2--- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | Q - 70.0 |
| NMFC: | 095190 - Hardware, noi sub 9 |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 723 - Radio parts and equipment, excluding tubes packed separately |
