Are you looking quote for part JM44LC33WH13? The J And M Products Inc-manufactured component (CAGE Code: 22175) is documented under NSN 5340-01-485-5849 as Clamp Loop. For the fastest quote, please complete our RFQ form with details about JM44LC33WH13. We guarantee a response within 15 minutes.
ASAP Components provides the verified JM44LC33WH13, classified under INC 17532, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 01-485-5849, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-485-5849 Item PartTypeName: CLAMP,LOOP | 5340 | 014855849 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| JM44LC33WH13 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND, UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.031 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| AXWJ | FASTENING DEVICE TYPE | SNAP FASTENER |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.858 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.153 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | DRAWING TITLE - CLAMP, LOOP-CUSHIONED, SLOTTED, SELF-RETAINING; SLOTTED BAND W/1 BRIDGE; USE - ON WIRE BUNDLES AND NONHYDRAULIC-TUBES |
| MATT | MATERIAL | RUBBER CHLOROPRENE CLASS CR CUSHION |
| MATT | MATERIAL | STEEL COMP 321 BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5510, ANNEALED FED SPEC SINGLE MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | PASSIVATE BAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9bqe--9 |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | W - Rating variable |
| LTL: | W - Rating variable |
| NMFC: | 095190 - Hardware, noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
