Are you looking quote for part JM43LC14WD15X? The J And M Products Inc-manufactured component (CAGE Code: 22175) is documented under NSN 5340-00-685-5848 as Clamp Loop. For the fastest quote, please complete our RFQ form with details about JM43LC14WD15X. We guarantee a response within 15 minutes.
ASAP Components provides the verified JM43LC14WD15X, classified under INC 17532, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 00-685-5848, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-685-5848 Item Description: CLAMP,LOOP | 5340 | 006855848 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| JM43LC14WD15X | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND, UNTHREADED |
| ABMK | OVERALL WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.858 INCHES MINIMUM AND 0.888 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.076 INCHES MINIMUM AND 1.106 INCHES MAXIMUM |
| BZTN | LOOP INSIDE DIAMETER | 0.923 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |
| CCNF | APPLICATION/FUNCTION | WIRE SUPPORT |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 BAND |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-362,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
| SUPP | SUPPLEMENTARY FEATURES | SODIUM ETCHED NO-SLIP CUSHION |
| ZZZK | SPECIFICATION/STANDARD DATA | 81755-C2037 MANUFACTURERS SPECIFICATION CONTROL |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | S - 60.0 |
| LTL: | S - 60.0 |
| NMFC: | 061200 - Cable clamps/joints noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 658 - Electrical appliances, small |
