Are you looking quote for part SS7560H4FS? The J And M Products Inc-manufactured component (CAGE Code: 22175) is documented under NSN 5340-00-216-8292 as Clamp Loop. For the fastest quote, please complete our RFQ form with details about SS7560H4FS. We guarantee a response within 15 minutes.
ASAP Components provides the verified SS7560H4FS, classified under INC 17532, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 00-216-8292, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-216-8292 Item PartTypeName: CLAMP,LOOP | 5340 | 002168292 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| JM44LC22H4R | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND WEATHER RESISTANT AND TEAR RESISTANT |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.029 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.529 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.809 INCHES MINIMUM AND 0.839 INCHES MAXIMUM |
| BZTN | LOOP INSIDE DIAMETER | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 321 BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3347 ASSN STD SINGLE MATERIAL RESPONSE CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | PASSIVATE BAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
| ZZZK | SPECIFICATION/STANDARD DATA | 75286-SS7560 MANUFACTURERS SPECIFICATION |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | D |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | Q - 70.0 |
| NMFC: | 095190 - Hardware, noi sub 9 |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
