Are you looking quote for part PL611-119FIGE2349ITEM5? The Invensys Systems Inc-manufactured component (CAGE Code: 1MHW8) is documented under NSN 5330-01-585-8196 as Seal Nonmetallic An. For the fastest quote, please complete our RFQ form with details about PL611-119FIGE2349ITEM5. We guarantee a response within 15 minutes
ASAP Components provides the verified PL611-119FIGE2349ITEM5, classified under INC 32845, FSG 53 Hardware and Abrasives, FSC 5330 Packing and Gasket Materials, NIIN 01-585-8196, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-01-585-8196 Item PartTypeName: SEAL,NONMETALLIC ANGLE | 5330 | 015858196 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2800-119 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | L SHAPE |
| ADWS | RIGHT/BASE FLANGE HEIGHT | 10.540 INCHES NOMINAL |
| ADWT | LEFT FLANGE HEIGHT | 5.420 INCHES NOMINAL |
| ADWU | LEFT FLANGE THICKNESS AT TOE | 0.310 INCHES NOMINAL |
| ADWV | RIGHT/BASE FLANGE THICKNESS AT TOE | 0.310 INCHES NOMINAL |
| ADWW | RIGHT/BASE FLANGE THICKNESS AT HEEL | 0.310 INCHES NOMINAL |
| ADWX | LEFT FLANGE THICKNESS AT HEEL | 0.310 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | CONDUCTIVITY MONITORS (PL 611-119) |
| CWCJ | INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | 2 .190 IN. HOLES IN SHORT LEG 2.25 AND 3.50 INCHES FROM ITS EDGE;PRESSURE SENISTIVE ADHESIVE ONE SIDE;.130 INCHES THICK;1 SET 2 PIECES |
| MATT | MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | R-411-N (NEOPRENE) MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9b----- |
| Quantity per pack | No qup |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Se |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 194120 - Washers/gaskets/pckg dvcs noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 596 - Gaskets, (machinery and parts),(less than 35 feet) |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
