Are you looking quote for part P441A? The Indak Mfg Corp-manufactured component (CAGE Code: 89522) is documented under NSN 5930-01-209-6829 as Switch Push. For the fastest quote, please complete our RFQ form with details about P441A. We guarantee a response within 15 minutes.
ASAP Components provides the verified P441A, classified under INC 00406, FSG 59 Electrical and Electronic Equipment Components, FSC 5930 Switches, NIIN 01-209-6829, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5930-01-209-6829 Item PartTypeName: SWITCH,PUSH | 5930 | 012096829 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| D67872 | 5 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AFXE | MAXIMUM VOLTAGE RATING IN VOLTS | 24.0 DC |
| AGAV | END ITEM IDENTIFICATION | 2420-01-176-2568 |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED |
| CRLD | NONPILE-UP CONTACT ARRANGEMENT | 1 POLE,SINGLE THROW,NORMALLY OPEN,MOMENTARY ACTION SINGLE SWITCH UNIT |
| CXQR | CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 15.000 AMPERES RESISTIVE DC |
| FEAT | SPECIAL FEATURES | NEOPRENE RUBBER BOOT; MTG PLATE 2.250 IN. LG,1.56 IN. W,TWO 0.218 IN. DIA HOLES; SELF RETURN |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 QUICK DISCONNECT,MALE |
| End Use : 20005 | Electric apparatus |
|---|---|
| Schedule B : 8536509035 (NAICS 335931) | Switches, push-button, rated at over 5 a, for a voltage not exceeding 1, 000 v |
| SITC : 77255 | Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
