Are you looking quote for part CA3962? The Hutchinson Seal Corp-manufactured component (CAGE Code: SW461) is documented under NSN 5330-00-891-6023 as Gasket. For the fastest quote, please complete our RFQ form with details about CA3962. We guarantee a response within 15 minutes.
ASAP Components provides the verified CA3962, classified under INC 04522, FSG 53 Hardware and Abrasives, FSC 5330 Packing and Gasket Materials, NIIN 00-891-6023, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | METAL AND SYNTHETIC RUBBER |
| AAUB | HOLE DIAMETER | 0.289 INCHES MINIMUM AND 0.296 INCHES MAXIMUM |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 350.0 DEG FAHRENHEIT |
| ABKG | BOLT CIRCLE DIAMETER | 4.151 INCHES MINIMUM AND 4.161 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 4.956 INCHES NOMINAL |
| ABVL | APERTURE DIAMETER | 3.296 INCHES NOMINAL |
| ADPW | OUTSIDE CORNER RADIUS | 0.400 INCHES NOMINAL |
| ADVC | SIDE RADIUS FROM GASKET CENTER | 2.078 INCHES NOMINAL |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.120 INCHES NOMINAL |
| ADWF | GAGE RING THICKNESS | 0.080 INCHES NOMINAL |
| AECS | BOLT HOLE QUANTITY | 8 |
| CTQW | MAXIMUM PRESSURE RATING | 94.0 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | RUBBER SYNTHETIC OVERALL AND ALUMINUM ALLOY 6061 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LS-53,FSCM 71984 MFR REF 1ST MATERIAL RESPONSE OVERALL AND QQ-A-327,T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | NON-CIRCULAR |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
