Quote for 1101-1-B7 Hellermanntyton Limited Part with NSN 5970-00-956-5047

Part Number:  1101-1-B7
Alternate P/N:  11011B7
Manufacturer:  hellermanntyton limited
NIIN:  9565047
Item Name :  insulation sleeving
CAGE Code:  K0720
INC Code:  61626
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  01-15-2026

Are you looking quote for part 1101-1-B7? The Hellermanntyton Limited-manufactured component (CAGE Code: K0720) is documented under NSN 5970-00-956-5047 as Insulation Sleeving. For the fastest quote, please complete our RFQ form with details about 1101-1-B7. We guarantee a response within 15 minutes.

ASAP Components provides the verified 1101-1-B7, classified under INC 61626, FSG 59 Electrical and Electronic Equipment Components, FSC 5970 Electrical Insulators and Insulating Materials, NIIN 00-956-5047, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for 1101-1-B7

“*” Required Fields Are Compulsory

NSN Information for Part Number 1101-1-B7 with NSN 5970-00-956-5047, 5970009565047

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5970-00-956-5047

Item PartTypeName:

INSULATION SLEEVING,ELECTRICAL,S

59700095650478P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
10672035-3513

Characteristics Data of NSN 5970-00-956-5047, 5970009565047

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJHTEMP RATING-55.0 DEG CELSIUS
ADZCENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT
AFZPLARGE END WALL THICKNESS OF MAIN BODY0.080 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AFZQSMALL END WALL THICKNESS OF MAIN BODY0.080 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AFZRDISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END2.110 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AFZSDISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END1.150 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AGAJMAIN BODY SMALL END INSIDE DIAMETER1.730 INCHES MINIMUM AS SUPPLIED
AGAKMAIN BODY LARGE END INSIDE DIAMETER1.730 INCHES MINIMUM AS SUPPLIED
AGAMDISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY0.680 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AGAPANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG90.0 NOMINAL AS SUPPLIED
BDBNMARKINGSNOT KNOWN
CQBCMINIMUM TENSILE STRENGTH1500 POUNDS PER SQUARE INCH
FLEXFLEXIBILITYSEMIRIGID
HGTHHEIGHT1.730 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
HUESCOLORBLACK
MATTMATERIALPLASTIC POLYOLEFIN
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONRT-301,RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE
STYLSTYLE DESIGNATORBOOT-90 DEGREES
UKBGDIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS200.0 VOLTS PER MIL 0.001 INCH

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8546900000 (NAICS 326199) Electrical insulators, nesoi
SITC : 77324 Electrical insulators of material other than glass or ceramics

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL 12b2---
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life 48 mo.
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 103300 - Insulating material noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top