Quote for KB-01-XXX-XXX-01-XXXX-FL George Risk Industries Inc Part with NSN 5930-01-079-3510

Part Number:  KB-01-XXX-XXX-01-XXXX-FL
Alternate P/N:  KB01XXXXXX01XXXXFL
Manufacturer:  george risk industries inc
NIIN:  10793510
Item Name :  switch push
CAGE Code:  24229
FSC:  5930 Switches
INC Code:  00406
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  01-17-2026

Are you looking quote for part KB-01-XXX-XXX-01-XXXX-FL? The George Risk Industries Inc-manufactured component (CAGE Code: 24229) is documented under NSN 5930-01-079-3510 as Switch Push. For the fastest quote, please complete our RFQ form with details about KB-01-XXX-XXX-01-XXXX-FL. We guarantee a response within 15 minutes.

ASAP Components provides the verified KB-01-XXX-XXX-01-XXXX-FL, classified under INC 00406, FSG 59 Electrical and Electronic Equipment Components, FSC 5930 Switches, NIIN 01-079-3510, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for KB-01-XXX-XXX-01-XXXX-FL

“*” Required Fields Are Compulsory

NSN Information for Part Number KB-01-XXX-XXX-01-XXXX-FL with NSN 5930-01-079-3510, 5930010793510

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-01-079-3510

Item PartTypeName:

SWITCH,PUSH

59300107935100P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
804603-1523

Characteristics Data of NSN 5930-01-079-3510, 5930010793510

MRCCriteriaCharacteristic
AAQLBODY STYLEPANEL MOUNT
ABHPOVERALL LENGTH1.530 INCHES NOMINAL
ABKWOVERALL HEIGHT0.680 INCHES NOMINAL
ABMKOVERALL WIDTH0.680 INCHES NOMINAL
ABPMBODY DIAMETER0.680 INCHES NOMINAL
AFXEMAXIMUM VOLTAGE RATING IN VOLTS125.0 AC AND 28.0 DC
AKNAINCLOSURE TYPEHERMETICALLY SEALED
AXGYMOUNTING METHODPANEL
CMLPTHREAD QUANTITY PER INCH56
CQJXNOMINAL THREAD SIZE0.086 INCHES
CRLDNONPILE-UP CONTACT ARRANGEMENT1 POLE,SINGLE THROW,NORMALLY OPEN,MOMENTARY ACTION SINGLE SWITCH UNIT
CWJKCASE MATERIALPLASTIC
CXQRCONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE0.500 AMPERES RESISTIVE DC AND 0.500 AMPERES RESISTIVE AC
FEATSPECIAL FEATURESTHD STUD MTG
THSDTHREAD SERIES DESIGNATORUNC
TTQYTERMINAL TYPE AND QUANTITY2 PIN

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509035 (NAICS 335931) Switches, push-button, rated at over 5 a, for a voltage not exceeding 1, 000 v
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q22sbx-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top