Quote for 29F521G4 General Electric Company Part with NSN 5910-00-835-3596

Part Number:  29F521G4
Manufacturer:  general electric company
NIIN:  8353596
Item Name :  capacitor fixed ele
CAGE Code:  95018
INC Code:  00008
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  03-10-2026

Are you looking quote for part 29F521G4? The General Electric Company-manufactured component (CAGE Code: 95018) is documented under NSN 5910-00-835-3596 as Capacitor Fixed Ele. For the fastest quote, please complete our RFQ form with details about 29F521G4. We guarantee a response within 15 minutes.

ASAP Components provides the verified 29F521G4, classified under INC 00008, FSG 59 Electrical and Electronic Equipment Components, FSC 5910 Capacitors, NIIN 00-835-3596, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for 29F521G4

“*” Required Fields Are Compulsory

NSN Information for Part Number 29F521G4 with NSN 5910-00-835-3596, 5910008353596

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-00-835-3596

Item PartTypeName:

CAPACITOR,FIXED,ELECTROLYTIC

5910008353596P
CIICHCCESDPMICCriticalityENAC
A
Part NumberISCRNVCRNCCHCCMSDSSADC
1366948-28B25

Characteristics Data of NSN 5910-00-835-3596, 5910008353596

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH1.500 INCHES MINIMUM
ADAQBODY LENGTH1.563 INCHES NOMINAL
AECEANODE TYPEETCHED FOIL
AECNIMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS283.0
AECQELECTRICAL POLARIZATIONNONPOLARIZED
CBBLFEATURES PROVIDEDHERMETICALLY SEALED CASE
CQBQCAPACITANCE VALUE PER SECTION12.000 MICROFARADS SINGLE SECTION
CQLHDC LEAKAGE AT MAXIMUM OPERATING TEMP80.0 MILLIAMPERES
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION100.0 DC SINGLE SECTION
CWSGTERMINAL SURFACE TREATMENTSOLDER
AAQLBODY STYLEW/O MTG FACILITIES,AXIAL TERMINALS
ABPMBODY DIAMETER0.406 INCHES MAXIMUM
AEBZSCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
CQJJNONDERATED OPERATING TEMP-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
CRTPTOLERANCE RANGE PER SECTION-15.00 TO 30.00 PERCENT SINGLE SECTION
CWJKCASE MATERIALMETAL
CWNJCAPACITIVE ELECTRODE MATERIALTANTALUM
CWQHDC LEAKAGE AT REFERENCE TEMP5.000 MICROAMPERES
CWSZCASE INSULATION MATERIALPLASTIC
TTQYTERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532290040 (NAICS 334416) Fixed capacitors, nesoi
SITC : 77867 Fixed capacitors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL 15e2---
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS S9e
Unit of Measure Ea

ASAP Semiconductor’s Certifications And Memberships



bottom to top