Are you looking quote for part 33-802948-1? The General Dynamics Advanced-manufactured component (CAGE Code: 07397) is documented under NSN 5930-00-073-9977 as Switch Rotary. For the fastest quote, please complete our RFQ form with details about 33-802948-1. We guarantee a response within 15 minutes.
ASAP Components provides the verified 33-802948-1, classified under INC 02134, FSG 59 Electrical and Electronic Equipment Components, FSC 5930 Switches, NIIN 00-073-9977, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5930-00-073-9977 Item PartTypeName: SWITCH,ROTARY | 5930 | 000739977 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | S | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 33-802948-1 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| ABHP | OVERALL LENGTH | 3.438 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 2.250 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.250 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| ABXF | SHAFT LENGTH | 0.938 INCHES NOMINAL SINGLE ACTUATOR |
| AFBH | INDIVIDUAL SECTION QUANTITY | 2 |
| AFDS | LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 1.500 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 1 EACH SECTION FRONT |
| AKPX | POLE QUANTITY | 1 EACH SECTION REAR |
| AKPY | THROW QUANTITY | 30 EACH SECTION FRONT |
| AKPY | THROW QUANTITY | 30 EACH SECTION REAR |
| AXGY | MOUNTING METHOD | THREADED HOLE SINGLE MOUNTING FACILITY |
| CMLP | THREAD QUANTITY PER INCH | 32 SINGLE MOUNTING FACILITY |
| CQJX | NOMINAL THREAD SIZE | 0.164 INCHES SINGLE MOUNTING FACILITY |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CQYJ | MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE SINGLE MOUNTING FACILITY |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 30 SINGLE ACTUATOR |
| CRSJ | SHAFT TYPE | ROUND SINGLE ACTUATOR |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS EACH SECTION FRONT |
| CSHW | CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS EACH SECTION REAR |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | 12.0 DEGREES SINGLE ACTUATOR |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| CTHF | CONTACT LOAD CURRENT RATING | 2.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINALS AND CONTACT SURFACES SILVER |
| PRMT | PRECIOUS MATERIAL | SILVER |
| STYL | STYLE DESIGNATOR | TAP,SQUARE FRAME |
| THSD | THREAD SERIES DESIGNATOR | UNC SINGLE MOUNTING FACILITY |
| End Use : 20005 | Electric apparatus |
|---|---|
| Schedule B : 8536509020 (NAICS 335931) | Switches, rotary, rated at not over 5 a, for a voltage not exceeding 1, 000 v |
| SITC : 77255 | Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | S - Item contains silver. |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9b----- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | P - 77.5 |
| NMFC: | 061300 - Circuit breaker/switch noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
