Quote for 007495 Ge Aviation Systems Ltd Part with NSN 5950-01-337-6423

Part Number:  007495
Manufacturer:  ge aviation systems ltd
NIIN:  13376423
Item Name :  coil electrical
CAGE Code:  058R3
INC Code:  32494
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  01-30-2026

Are you looking quote for part 007495? The Ge Aviation Systems Ltd-manufactured component (CAGE Code: 058R3) is documented under NSN 5950-01-337-6423 as Coil Electrical. For the fastest quote, please complete our RFQ form with details about 007495. We guarantee a response within 15 minutes.

ASAP Components provides the verified 007495, classified under INC 32494, FSG 59 Electrical and Electronic Equipment Components, FSC 5950 Coils and Transformers, NIIN 01-337-6423, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for 007495

“*” Required Fields Are Compulsory

NSN Information for Part Number 007495 with NSN 5950-01-337-6423, 5950013376423

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5950-01-337-6423

Item PartTypeName:

COIL,ELECTRICAL

59500133764230P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
007495593

Characteristics Data of NSN 5950-01-337-6423, 5950013376423

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
AKDXWINDING QUANTITY2 SINGLE COMPONENT
ACZBFREQUENCY RATING400.0 HERTZ NOMINAL SINGLE COMPONENT
CRBZWINDING OPERATING CURRENT1.0 AMPERES AC NOMINAL SINGLE COMPONENT ALL WINDING
CWJSWINDING OPERATING VOLTAGE1.40 AC VOLTS NOMINAL SINGLE COMPONENT ALL WINDING
ABHPOVERALL LENGTH0.750 INCHES MAXIMUM
ACYVINDUCTANCE RATING550.00 MICROHENRIES NOMINAL SINGLE COMPONENT ALL WINDING
ADAVOVERALL DIAMETER0.910 INCHES MINIMUM AND 0.970 INCHES MAXIMUM
AXGYMOUNTING METHODTHREADED HOLE SINGLE GROUP
BKPLRATING METHODELECTRICAL SINGLE COMPONENT ALL WINDING
CQJXNOMINAL THREAD SIZE0.112 INCHES SINGLE GROUP
TESTTEST DATA DOCUMENT19623-007495 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI
THSDTHREAD SERIES DESIGNATORUNC SINGLE GROUP
TTQYTERMINAL TYPE AND QUANTITY4 TAB,SOLDER LUG
AKNAINCLOSURE TYPEFULLY INCLOSED
CRGSDC RESISTANCE RATING IN OHMS0.400 SINGLE COMPONENT ALL WINDING
ACZRCORE CONSTRUCTIONS0LID SINGLE COMPONENT
AEHZMAXIMUM OPERATING TEMP130.0 DEG CELSIUS
AKPVMOUNTING FACILITY QUANTITY1 SINGLE GROUP

Schedule B & Trade

End Use : 20000 Generators, accessories
Schedule B : 8504500000 (NAICS 334416) Inductors, nesoi
SITC : 77125 Electrical inductors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063420 - Transformers, noi, or transformer par
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top