Are you looking quote for part 00L127? The Federal Specifications-manufactured component (CAGE Code: 81348) is documented under NSN 3416-00-242-8816 as Lathe Engine. For the fastest quote, please complete our RFQ form with details about 00L127. We guarantee a response within 15 minutes.
ASAP Components provides the verified 00L127, classified under INC 03137, FSG 34 Metalworking Machinery, FSC 3416 Lathes, NIIN 00-242-8816, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| MRC | Criteria | Characteristic |
|---|---|---|
| ACDC | Current Type | AC |
| APGF | Design Type | SCREW |
| AWHA | Bed Type | SOLID |
| AWLX | Electric Motor Quantity | 1 |
| AAXX | Mounting Type | FLOOR |
| ZZZT | Nondefinitive Spec/Std Data | 16 SIZE |
| ASHK | Electric Motor Horsepower Rating | 5.000 |
| ZZZX | Departure From Cited Designator | ADQR AND ASHK |
| ADQR | Center To Center Distance | 30.000 INCHES NOMINAL |
| ELEC | Voltage In Volts | 220.0 AND 440.0 |
| AGLD | Performance Type | STANDARD DUTY |
| FAAZ | Phase | THREE |
| BTSZ | Spindle Speed Quantity | 16 |
| BTTB | Spindle Speed Range In Rpm | +25.0/+1000.0 |
| BTTD | Rated Swing | 16.000 INCHES NOMINAL |
| BTTG | Swing Over Cross Slide | 10.000 INCHES NOMINAL |
| AKSL | Purpose For Which Designed | TOOLROOM |
| BTWB | Thread Change Quantity | 30 |
| AKYD | Accessory Components And Quantity | 1 SET TRANSPOSING GEARS FOR METRIC THREADS |
| BTWL | Headstock Drive Type | GEARED HEAD |
| BTWM | Headstock Center Taper Size Designator | 4 ASA STANDARD |
| FREQ | Frequency In Hertz | 60.0 |
| BTYP | Hole Diameter Through Spindle | 1.562 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| BTYW | Gear Change Type | QUICK |
| BTZR | Thread Quantity Range | +4.0/+80.0 PER INCH |
| End Use : 21120 | Metalworking machine tools |
|---|---|
| Schedule B : 8458190030 (NAICS 333517) | Horizontal lathes, metal removing, except numerically controlled, engine or toolroom type, valued $3, 025 and over each, new |
| SITC : 73137 | Horizontal lathes, other than numerically controlled, for removing metal |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input). |
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | A - Item does not contain precious metal. |
| AAC | B |
|---|---|
| Classification Control | U |
| MGMT_CTL | Pdy---n |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Flz |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | M - 85.0 |
| LTL: | W - Rating variable |
| NMFC: | 131670 - Tools pwr o/t pwr hnd tools |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72E - Engineer and material handling equipment, test/tool sets and equipment |
