Quote for SI-08-F Espey Mfg And Electronics Corp Part with NSN 5915-01-098-8443

Part Number:  SI-08-F
Alternate P/N:  SI08F
NIIN:  10988443
Item Name :  filter low pass
CAGE Code:  98675
INC Code:  13911
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  05-21-2025

Are you looking quote for part SI-08-F? The Espey Mfg And Electronics Corp-manufactured component (CAGE Code: 98675) is documented under NSN 5915-01-098-8443 as Filter Low Pass. For the fastest quote, please complete our RFQ form with details about SI-08-F. We guarantee a response within 15 minutes

ASAP Components provides the verified SI-08-F, classified under INC 13911, FSG 59 Electrical and Electronic Equipment Components, FSC 5915 Filters and Networks, NIIN 01-098-8443, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SI-08-F

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number SI-08-F with NSN 5915-01-098-8443, 5915010988443

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5915-01-098-8443

Item PartTypeName:

FILTER,LOW PASS

59150109884430P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
1919-2225

Characteristics Data of NSN 5915-01-098-8443, 5915010988443

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH6.062 INCHES NOMINAL
ABKWOVERALL HEIGHT2.187 INCHES NOMINAL
ADAQBODY LENGTH5.609 INCHES NOMINAL
ADATBODY WIDTH1.250 INCHES NOMINAL
ADAUBODY HEIGHT1.812 INCHES NOMINAL
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.098 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH5.781 INCHES NOMINAL
AECRVIBRATION RESISTANCE RANGE IN HERTZ10.0 TO 55.0
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.750 INCHES NOMINAL
AFGAOPERATING TEMP RANGE-40.0 TO 100.0 DEG CELSIUS
AHAJREFERENCE FREQUENCY PER FUNCTION51.5 MEGAHERTZ BLANK
AHAUINPUT IMPEDANCE PER FUNCTION W/LOAD50.0 OHMS BLANK
AHAVOUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT50.0 OHMS BLANK
AKNAINCLOSURE TYPEHERMETICALLY SEALED
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE
CQDRINSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS0.8 BLANK
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 CONNECTOR,RECEPTACLE INPUT 1ST FUNCTION
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 CONNECTOR,RECEPTACLE OUTPUT 2ND FUNCTION
CQFCSPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION50.10 MEGAHERTZ BLANK AND 53.00 MEGAHERTZ BLANK AND 60.10 MEGAHERTZ BLANK AND 90.00 MEGAHERTZ BLANK
CQRGBODY MATERIALMETAL
CRBBFREQUENCY BAND WIDTH PER FUNCTION50.10 MEGAHERTZ BLANK AND 53.00 MEGAHERTZ BLANK
CRBCDISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS1.0 MAXIMUM BLANK AND 50.0 MINIMUM BLANK 1ST FUNCTION
FEATSPECIAL FEATURESFOUR 4-40NC-2B CAPTIVE SCREWS IN MTG HOLES
STYLSTYLE DESIGNATORRECTANGULAR TERMINAL/TERMINALS ON TWO SURFACES

Schedule B & Trade

End Use : 41210 Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310) Reception apparatus, nesoi
SITC : 76289 Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q22rbx-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Part SI-08-F With Different Manufacturers

USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications And Memberships



bottom to top