Quote for PH1122-1C1Z Electronic Fabricators Inc Part with NSN 5910-00-802-6083

Part Number:  PH1122-1C1Z
Alternate P/N:  PH11221C1Z
Manufacturer:  electronic fabricators inc
NIIN:  8026083
Item Name :  capacitor fixed pla
CAGE Code:  00884
INC Code:  00006
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  03-11-2026

Are you looking quote for part PH1122-1C1Z? The Electronic Fabricators Inc-manufactured component (CAGE Code: 00884) is documented under NSN 5910-00-802-6083 as Capacitor Fixed Pla. For the fastest quote, please complete our RFQ form with details about PH1122-1C1Z. We guarantee a response within 15 minutes.

ASAP Components provides the verified PH1122-1C1Z, classified under INC 00006, FSG 59 Electrical and Electronic Equipment Components, FSC 5910 Capacitors, NIIN 00-802-6083, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for PH1122-1C1Z

“*” Required Fields Are Compulsory

NSN Information for Part Number PH1122-1C1Z with NSN 5910-00-802-6083, 5910008026083

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-00-802-6083

Item PartTypeName:

CAPACITOR,FIXED,PLASTIC DIELECTR

59100080260830P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
61598-3225

Characteristics Data of NSN 5910-00-802-6083, 5910008026083

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
AEBZSCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
CBBLFEATURES PROVIDEDHERMETICALLY SEALED CASE
CQBFINSULATION RESISTANCE AT MAXIMUM OPERATING TEMP100000.0 MEGOHM-MICROFARADS
CQBQCAPACITANCE VALUE PER SECTION11200.000 PICOFARADS SINGLE SECTION
CQLZTEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS-100.0 SINGLE SECTION
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION100.0 DC SINGLE SECTION
CRHDTOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS-40.0 TO 40.0 SINGLE SECTION
AAQLBODY STYLEW/O MTG FACILITIES,AXIAL TERMINALS
ABJTTERMINAL LENGTH1.625 INCHES MINIMUM
ABPMBODY DIAMETER0.312 INCHES NOMINAL
ADAQBODY LENGTH0.939 INCHES NOMINAL
AFHWINTERNAL ELECTRICAL CONNECTION TYPEEXTENDED FOIL
CQJJNONDERATED OPERATING TEMP-65.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
CRTPTOLERANCE RANGE PER SECTION-1.00 TO 1.00 PERCENT SINGLE SECTION
CWJKCASE MATERIALMETAL
CWPKINSULATION RESISTANCE AT REFERENCE TEMP1000000.0 MEGOHM-MICROFARADS
CWPNPOWER FACTOR AT REFERENCE TEMP IN PERCENT0.0002
CWSGTERMINAL SURFACE TREATMENTSOLDER
CWSSDIELECTRIC MATERIALPLASTIC POLYETHYLENE TEREPHTHALATE
TTQYTERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532250080 (NAICS 334416) Fixed capacitors, dielectric of paper or plastic, nesoi
SITC : 77866 Paper or plastics dielectric fixed capacitors

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC X
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top