Quote for JT-2897 Electro Switch Corp Part with NSN 5930-01-336-3702

Part Number:  JT-2897
Alternate P/N:  JT2897
Manufacturer:  electro switch corp
NIIN:  13363702
Item Name :  switch toggle
CAGE Code:  79692
FSC:  5930 Switches
INC Code:  00184
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  03-02-2026

Are you looking quote for part JT-2897? The Electro Switch Corp-manufactured component (CAGE Code: 79692) is documented under NSN 5930-01-336-3702 as Switch Toggle. For the fastest quote, please complete our RFQ form with details about JT-2897. We guarantee a response within 15 minutes.

ASAP Components provides the verified JT-2897, classified under INC 00184, FSG 59 Electrical and Electronic Equipment Components, FSC 5930 Switches, NIIN 01-336-3702, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for JT-2897

“*” Required Fields Are Compulsory

NSN Information for Part Number JT-2897 with NSN 5930-01-336-3702, 5930013363702

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-01-336-3702

Item PartTypeName:

SWITCH,TOGGLE

59300133637020P
CIICHCCESDPMICCriticalityENAC
U G
Part NumberISCRNVCRNCCHCCMSDSSADC
A3084205223

Characteristics Data of NSN 5930-01-336-3702, 5930013363702

MRCCriteriaCharacteristic
AAQLBODY STYLEBUSHING MOUNT
ADATBODY WIDTH0.512 INCHES NOMINAL
AFUQACTUATOR STYLEROUND
AKNAINCLOSURE TYPEFULLY INCLOSED
ABKWOVERALL HEIGHT1.465 INCHES NOMINAL
AFUSACTUATOR HEIGHT0.560 INCHES NOMINAL
AFUXACTUATOR POSITION-ACTION RELATIONSHIPUP POSITION MAINTAINED AND DOWN POSITION MAINTAINED
AFXEMAXIMUM VOLTAGE RATING IN VOLTS250.0 AC
AXGYMOUNTING METHODTHREADED BUSHING
CMLPTHREAD QUANTITY PER INCH40
CQJXNOMINAL THREAD SIZE0.250 INCHES
CRLDNONPILE-UP CONTACT ARRANGEMENT2 POLE,DOUBLE THROW,BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT
CXQRCONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE3.000 AMPERES RESISTIVE AC
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT AND TERMINAL SURFACES GOLD AND CONTACT SURFACES SILVER
THSDTHREAD SERIES DESIGNATORUNS
TTQYTERMINAL TYPE AND QUANTITY6 TAB,SOLDER LUG
ABHPOVERALL LENGTH0.512 INCHES NOMINAL
ADAQBODY LENGTH0.512 INCHES NOMINAL
ADAUBODY HEIGHT0.433 INCHES NOMINAL
ABMKOVERALL WIDTH0.512 INCHES NOMINAL
ABXDBUSHING LENGTH0.315 INCHES NOMINAL
AFURACTUATOR DIAMETER0.217 INCHES NOMINAL
AGAVEND ITEM IDENTIFICATION5841-01-236-8951 DETECTING SET,RADAR SIGNALS

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509065 (NAICS 335931) Switches, for a voltage not exceeding 1000 volts, nesoi
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top