Quote for 253203H4C Electro Switch Corp Part with NSN 5930-00-866-9671

Part Number:  253203H4C
Manufacturer:  electro switch corp
NIIN:  8669671
Item Name :  switch rotary
CAGE Code:  76854
FSC:  5930 Switches
INC Code:  02134
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  01-16-2026

Are you looking quote for part 253203H4C? The Electro Switch Corp-manufactured component (CAGE Code: 76854) is documented under NSN 5930-00-866-9671 as Switch Rotary. For the fastest quote, please complete our RFQ form with details about 253203H4C. We guarantee a response within 15 minutes.

ASAP Components provides the verified 253203H4C, classified under INC 02134, FSG 59 Electrical and Electronic Equipment Components, FSC 5930 Switches, NIIN 00-866-9671, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for 253203H4C

“*” Required Fields Are Compulsory

NSN Information for Part Number 253203H4C with NSN 5930-00-866-9671, 5930008669671

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-00-866-9671

Item PartTypeName:

SWITCH,ROTARY

59300086696710P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
253203H4C625

Characteristics Data of NSN 5930-00-866-9671, 5930008669671

MRCCriteriaCharacteristic
AASATHREAD LENGTH0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM SINGLE MOUNTING FACILITY
ABHPOVERALL LENGTH3.438 INCHES MINIMUM AND 3.626 INCHES MAXIMUM
ABKWOVERALL HEIGHT1.938 INCHES NOMINAL
ABMKOVERALL WIDTH1.938 INCHES NOMINAL
ABWVSHAFT DIAMETER0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR
ABXFSHAFT LENGTH0.922 INCHES MINIMUM AND 0.954 INCHES MAXIMUM SINGLE ACTUATOR
AFBHINDIVIDUAL SECTION QUANTITY3
AFDCNONTURN DEVICE TYPETAB AT 12:00 OCLOCK
AJZESWITCH CONTACT BASIC DESIGNNONPILE-UP NONSYMMETRICAL
AXGYMOUNTING METHODTHREADED BUSHING SINGLE MOUNTING FACILITY
CQJXNOMINAL THREAD SIZE0.375 INCHES SINGLE MOUNTING FACILITY
CRSJSHAFT TYPEROUND SINGLE ACTUATOR
CSCFTERMINAL TYPETAB,SOLDER LUG
STYLSTYLE DESIGNATORCIRCULAR WAFER,BUSHING MOUNT
THSDTHREAD SERIES DESIGNATORUNEF SINGLE MOUNTING FACILITY

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC X
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top