| MRC | Criteria | Characteristic |
|---|
| AARX | Inside Diameter | 1.000 INCHES NOMINAL |
| ABKU | Flange Thickness | 0.375 INCHES NOMINAL 1ST END |
| AFQN | Flange Length | 3.160 INCHES MINIMUM AND 3.220 INCHES MAXIMUM 1ST END |
| AECS | Bolt Hole Quantity | 4 2ND END |
| AGFF | Flange Width | 1.480 INCHES NOMINAL 2ND END |
| AECS | Bolt Hole Quantity | 4 1ST END |
| ABKV | Outside Diameter | 1.520 INCHES NOMINAL |
| CTCJ | Flange Style | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |
| CRWL | Inside Surface Condition | SMOOTH |
| AWLS | Connection Type | PLAIN FACE FLANGE 2ND END |
| AKUT | End Flange Construction | SOLID 2ND END |
| CQGM | Maximum Operating Pressure | 5000.0 POUNDS PER SQUARE INCH |
| ADKX | Angle Between Rigid Elbow Fittings In Deg | 160 |
| CRFY | Flow Angle | 45.0 DEGREES 1ST END |
| AFQN | Flange Length | 3.720 INCHES MINIMUM AND 3.780 INCHES MAXIMUM 2ND END |
| AKUU | End Connection Design | ELBOW 1ST END |
| AKUT | End Flange Construction | SOLID 1ST END |
| AKUU | End Connection Design | ELBOW 2ND END |
| CRDW | Hydrostatic Test Pressure | 10000.0 POUNDS PER SQUARE INCH |
| CRFY | Flow Angle | 45.0 DEGREES 2ND END |
| CRXX | Measuring Method And Length | 21.750 INCHES NOMINAL OVERALL |
| ADUY | Center To Center Distance Between Bolt Holes Along Width | 1.094 INCHES NOMINAL 1ST END |
| ADUZ | Center To Center Distance Between Bolt Holes Along Length | 2.250 INCHES NOMINAL 2ND END |
| AWLS | Connection Type | PLAIN FACE FLANGE 1ST END |
| ADUZ | Center To Center Distance Between Bolt Holes Along Length | 2.250 INCHES NOMINAL 1ST END |
| ABKU | Flange Thickness | 0.405 INCHES NOMINAL 2ND END |
| CQBD | Burst Test Pressure | 20000.0 POUNDS PER SQUARE INCH |
| ACKH | Minimum Inside Bending Radius | 12.000 INCHES |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MEDA | Media For Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CTCJ | Flange Style | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| AHNC | Connection Style | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| AHNC | Connection Style | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| AGAV | End Item Identification | 2350-01-390-4683 |
| AHNX | Bolt Hole Diameter | 0.406 INCHES NOMINAL 2ND END |
| AGFF | Flange Width | 2.660 INCHES NOMINAL 1ST END |
| AHNX | Bolt Hole Diameter | 0.469 INCHES NOMINAL 1ST END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| CQCS | Layer Composition And Location | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER WRAPPED RUBBER, SYNTHETIC |
| MRC | Decoded Requirement | Clear Text Reply |
| ADUY | Center To Center Distance Between Bolt Holes Along Width | 1.350 INCHES NOMINAL 2ND END |
