Are you looking quote for part T4086? The Dukane Seacom Inc-manufactured component (CAGE Code: 94970) is documented under NSN 5930-00-548-8622 as Switch Rotary. For the fastest quote, please complete our RFQ form with details about T4086. We guarantee a response within 15 minutes.
ASAP Components provides the verified T4086, classified under INC 02134, FSG 59 Electrical and Electronic Equipment Components, FSC 5930 Switches, NIIN 00-548-8622, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5930-00-548-8622 Item PartTypeName: SWITCH,ROTARY | 5930 | 005488622 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 15789 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABNB | FIRST FLAT LENGTH | 0.562 INCHES NOMINAL SINGLE ACTUATOR |
| ABNC | FLAT HEIGHT | 0.312 INCHES NOMINAL SINGLE ACTUATOR |
| ABWV | SHAFT DIAMETER | 0.375 INCHES NOMINAL SINGLE ACTUATOR |
| ABXF | SHAFT LENGTH | 0.625 INCHES NOMINAL SINGLE ACTUATOR |
| AFBH | INDIVIDUAL SECTION QUANTITY | 4 |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AXGY | MOUNTING METHOD | BRACKET SINGLE MOUNTING FACILITY |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 LOWEST AC VOLTAGE RATING AT SEA LEVEL |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 125.0 LOWEST DC VOLTAGE RATING AT SEA LEVEL |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 600.0 HIGHEST AC VOLTAGE RATING AT SEA LEVEL |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 600.0 HIGHEST DC VOLTAGE RATING AT SEA LEVEL |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 4 SINGLE ACTUATOR |
| CRSJ | SHAFT TYPE | ROUND,FLATTED SINGLE ACTUATOR |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION FRONT |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | 90.0 DEGREES SINGLE ACTUATOR |
| FEAT | SPECIAL FEATURES | 4 MTG HOLES 1/4 IN. DIA EQUALLY SPACED ON A 2-5/16 IN. DIA CIRCLE; 8-32 TAPPED HOLE THROUGH SHAFT CENTERED 11/64 IN. FROM END OF SHAFT PERPENDICULAR TO FLATTED SURFACE; FLATTED PORTION OF SHAFT MUST BE PARALLED TO VERTICAL CENTERLINE WHEN S |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9b----- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | P - 77.5 |
| NMFC: | 061300 - Circuit breaker/switch noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
