| MRC | Criteria | Characteristic |
|---|
| ABBH | INCLOSURE MATERIAL | METAL" |
| ABHP | OVERALL LENGTH | 1.772 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 0.667 INCHES MAXIMUM" |
| AGAV | END ITEM IDENTIFICATION | AC-130H, MC-130H, EC-130E, HC-130 AIRCRAFT." |
| AKPV | MOUNTING FACILITY QUANTITY | 1" |
| ALAZ | JOINT ELECTRONIC DEVICE ENGINEERING COUNCIL/JEDEC/CASE OUTLINE DESIGNATION | TO-65" |
| ALBA | ELECTRODE INTERNALLY-ELECTRICALLY CONNECTED TO CASE | ANODE" |
| AXGY | MOUNTING METHOD | THREADED STUD" |
| CCDG | OVERALL WIDTH ACROSS FLATS | 0.676 INCHES MINIMUM AND 0.684 INCHES MAXIMUM" |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES" |
| CTMZ | III SEMICONDUCTOR MATERIAL | SILICON" |
| CTQN | VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 1100.0 MAXIMUM NONREPETITIVE PEAK REVERSE VOLTAGE AND 1000.0 MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE AND 1000.0 MAXIMUM REPETITIVE PEAK OFF-STATE VOLTAGE" |
| CTQX | CURRENT RATING PER CHARACTERISTIC | 63.00 AMPERES FORWARD CURRENT, TOTAL RMS HORSEPOWER METRIC AND 40.00 AMPERES FORWARD CURRENT, TOTAL RMS UNIVERSAL" |
| CTSG | MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 125.0 DEG CELSIUS AMBIENT AIR" |
| TEST | TEST DATA DOCUMENT | 20418-ES4631 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI" |
| THSD | THREAD SERIES DESIGNATOR | UNF" |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG AND 1 THREADED STUD" |
| ABBH | INCLOSURE MATERIAL | METAL" |
| ABHP | OVERALL LENGTH | 1.772 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 0.667 INCHES MAXIMUM" |
| AGAV | END ITEM IDENTIFICATION | AC-130H, MC-130H, EC-130E, HC-130 AIRCRAFT." |
| AKPV | MOUNTING FACILITY QUANTITY | 1" |
| ALAZ | JOINT ELECTRONIC DEVICE ENGINEERING COUNCIL/JEDEC/CASE OUTLINE DESIGNATION | TO-65" |
| ALBA | ELECTRODE INTERNALLY-ELECTRICALLY CONNECTED TO CASE | ANODE" |
| AXGY | MOUNTING METHOD | THREADED STUD" |
| CCDG | OVERALL WIDTH ACROSS FLATS | 0.676 INCHES MINIMUM AND 0.684 INCHES MAXIMUM" |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES" |
| CTMZ | III SEMICONDUCTOR MATERIAL | SILICON" |
| CTQN | VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 1100.0 MAXIMUM NONREPETITIVE PEAK REVERSE VOLTAGE AND 1000.0 MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE AND 1000.0 MAXIMUM REPETITIVE PEAK OFF-STATE VOLTAGE" |
| CTQX | CURRENT RATING PER CHARACTERISTIC | 63.00 AMPERES FORWARD CURRENT, TOTAL RMS HORSEPOWER METRIC AND 40.00 AMPERES FORWARD CURRENT, TOTAL RMS UNIVERSAL" |
| CTSG | MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 125.0 DEG CELSIUS AMBIENT AIR" |
| TEST | TEST DATA DOCUMENT | 20418-ES4631 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI" |
| THSD | THREAD SERIES DESIGNATOR | UNF" |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG AND 1 THREADED STUD" |
