Are you looking quote for part LF90-50? The Dicar Inc-manufactured component (CAGE Code: 61787) is documented under NSN 5975-01-515-0526 as Elbow Electrical Co. For the fastest quote, please complete our RFQ form with details about LF90-50. We guarantee a response within 15 minutes.
ASAP Components provides the verified LF90-50, classified under INC 06944, FSG 59 Electrical and Electronic Equipment Components, FSC 5975 Electrical Hardware and Supplies, NIIN 01-515-0526, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5975-01-515-0526 Item PartTypeName: ELBOW,ELECTRICAL CONDUIT | 5975 | 015150526 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LF90-50 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABEX | DEFLECTION ANGLE | 90.0 DEGREES" |
| ADTS | CONSTRUCTION TYPE | ONE PIECE" |
| AELS | CONDUIT TYPE ACCOMMODATED | RIGID NONMETALLIC SINGLE END" |
| AGAV | END ITEM IDENTIFICATION | HPU ASSY" |
| APTD | END TYPE | INTERNAL THREAD SINGLE END" |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES SINGLE END" |
| CQMQ | LEG END TO PLANE OF BEND DISTANCE | 1.500 INCHES NOMINAL SINGLE END" |
| CQRN | THREAD QUANTITY | 14 PER INCH SINGLE END" |
| CQYR | ITEM ACCOMMODATED TRADE SIZE | 0.500 INCHES SINGLE END" |
| FEAT | SPECIAL FEATURES | CHECK UNIT ISSUE VS UNIT PRICE" |
| MATT | MATERIAL | IRON MALLEABLE" |
| STYL | STYLE DESIGNATOR | PULLING-SIDE OPENING" |
| SUPP | SUPPLEMENTARY FEATURES | STYL LISTED IN THIS TIR CALLS FOR A PULLING-SIDE OPENING WHICH THIS IS NOT BUT PICTORTIALLY IS CORRECT" |
| THSD | THREAD SERIES DESIGNATOR | NPT SINGLE END" |
| ABEX | DEFLECTION ANGLE | 90.0 DEGREES" |
| ADTS | CONSTRUCTION TYPE | ONE PIECE" |
| AELS | CONDUIT TYPE ACCOMMODATED | RIGID NONMETALLIC SINGLE END" |
| AGAV | END ITEM IDENTIFICATION | HPU ASSY" |
| APTD | END TYPE | INTERNAL THREAD SINGLE END" |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES SINGLE END" |
| CQMQ | LEG END TO PLANE OF BEND DISTANCE | 1.500 INCHES NOMINAL SINGLE END" |
| CQRN | THREAD QUANTITY | 14 PER INCH SINGLE END" |
| CQYR | ITEM ACCOMMODATED TRADE SIZE | 0.500 INCHES SINGLE END" |
| FEAT | SPECIAL FEATURES | CHECK UNIT ISSUE VS UNIT PRICE" |
| MATT | MATERIAL | IRON MALLEABLE" |
| STYL | STYLE DESIGNATOR | PULLING-SIDE OPENING" |
| SUPP | SUPPLEMENTARY FEATURES | STYL LISTED IN THIS TIR CALLS FOR A PULLING-SIDE OPENING WHICH THIS IS NOT BUT PICTORTIALLY IS CORRECT" |
| THSD | THREAD SERIES DESIGNATOR | NPT SINGLE END" |
| End Use : 12110 | Iron and steel products, other |
|---|---|
| Schedule B : 7307929000 (NAICS 332919) | Threaded elbows and bends of iron or steel (other than cast iron or stainless steel) for pipes and tubes |
| SITC : 67959 | Iron and steel tube and pipe fittings, n.E.S. |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9b----- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | J - 100.0 |
| NMFC: | 156643 - Plastic/rubr bends elbows/sweeps |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
