Are you looking quote for part G103-462? The Connecticut Spring And Stamping Co-manufactured component (CAGE Code: 81753) is documented under NSN 5340-01-157-1006 as Clip Spring Tension. For the fastest quote, please complete our RFQ form with details about G103-462. We guarantee a response within 15 minutes.
ASAP Components provides the verified G103-462, classified under INC 20815, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 01-157-1006, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-157-1006 Item PartTypeName: CLIP,SPRING TENSION | 5340 | 011571006 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| G103-462 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.125 INCHES NOMINAL |
| ABGL | WIDTH | 1.188 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.025 INCHES NOMINAL |
| ABRY | LENGTH | 1.438 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| AZWD | LOOP OPENING WIDTH | 0.875 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
| CJYS | LOOP/HOLDING DIMENSION | 0.188 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 301 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| End Use : 12300 | Finished metal shapes |
|---|---|
| Schedule B : 7326908530 (NAICS 332999) | Hangers and similar supports for tubes and pipes, of iron or steel |
| SITC : 69969 | Articles of iron or steel, n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9b----- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | Q - 70.0 |
| NMFC: | 094220 - Clips sheet steel noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
